D3C1725-6

RF Circulators And Isolators Overview

The D3C1725-6 is a three-port RF circulator manufactured by DiTom Microwave, designed for operation within the 1.7 GHz to 2.5 GHz frequency range. It features a single junction construction and utilizes SMA connectors with a Male-Male-Female configuration. The component operates reliably between -20°C and +65°C. Its physical dimensions are 1.25 inches by 0.73 inches by 1.25 inches. This device belongs to the D3C1725 series and is classified under RF Circulators.

RF Circulators And Isolators Feature Summary

• Three-port directional signal routing using single junction technology
• SMA connector interface with specific male-male-female pin configuration
• Robust performance across standard industrial temperature ranges

RF Circulators And Isolators Applications

• RF signal distribution networks
• Transmitter-receiver isolation stages
• Antenna switching systems

RF Circulators And Isolators Procurement Notes

Verify the specific SMA connector orientation (Male-Male-Female) against schematic requirements before ordering. Confirm that the operating frequency aligns strictly with the 1.7 GHz to 2.5 GHz specification. Ensure mechanical fitment matches the 1.25 x 0.73 x 1.25 inch housing dimensions. Check for RoHS compliance documentation if environmental regulations apply to the assembly.

RF Circulators And Isolators Selection Notes

Select this model when a three-port circulator is required for the 1.7-2.5 GHz band. The Male-Male-Female connector arrangement dictates cable compatibility. Consider the single junction design for standard isolation needs. Verify thermal limits suit the intended environment, as the range is limited to -20°C to +65°C. Compare against other series members if different port configurations are needed.

RF Circulators And Isolators Part Context

This component is part of the D3C1725 series from DiTom Microwave, which focuses on RF circulators for the 1.7-2.5 GHz spectrum. Variants in this series, such as the D3C1725-7, differ primarily in connector polarity. The series addresses applications requiring non-reciprocal signal flow in microwave circuits.

RF Circulators And Isolators Replacement Considerations

The D3C1725-7 serves as a direct alternative within the same series, offering identical electrical specifications but with a Female-Male-Male connector configuration. Ensure mechanical and cabling interfaces accommodate this polarity change before substitution.