D3I0710N-1

RF Circulators And Isolators Overview

The D3I0710N-1 is a single-junction RF isolator manufactured by DiTom Microwave. It operates within the frequency range of 698 MHz to 1 GHz. The device features Type-N female connectors and is housed in a module package with dimensions of 1.58 inches by 0.7 inches by 1.62 inches. Key electrical specifications include an average forward power rating of 300 W, an insertion loss of 0.6 dB, an isolation of 16 dB, and a VSWR of 1.4. The unit supports a minimum operating temperature of -20 C and a maximum operating temperature of +65 C.

RF Circulators And Isolators Feature Summary

• Provides signal isolation for radio frequency applications within the specified bandwidth.
• Supports high average forward power handling capabilities.
• Utilizes standard Type-N female connector interfaces for integration.

RF Circulators And Isolators Applications

• RF signal transmission systems
• Communication infrastructure components
• Radio frequency circuit protection

RF Circulators And Isolators Procurement Notes

Verify the specific suffix designation when ordering, as the base model D3I0710N may differ from the D3I0710N-1 variant. Confirm that the required connector type matches the Type-N female specification. Ensure the operational environment remains within the stated temperature limits of -20 C to +65 C. Check RoHS compliance status if environmental regulations apply to the project requirements.

RF Circulators And Isolators Selection Notes

Select this component when a dedicated isolator function is required rather than a circulator. Compare the 300 W power rating against system peak loads to ensure adequate margin. Evaluate the 16 dB isolation level against system noise floor requirements. Consider the physical module dimensions for enclosure space constraints during mechanical design.

RF Circulators And Isolators Part Context

This part belongs to the DiTom Microwave series of RF isolators designed for the 698 MHz to 1 GHz band. It is distinct from the D3C0710N series, which functions as a circulator. The D3I0710N-1 variant specifically denotes the isolator configuration with defined electrical parameters for unidirectional signal flow.

RF Circulators And Isolators Replacement Considerations

Publicly confirmed substitute part numbers are not available in the provided documentation. Verify compatibility with existing system impedance and connector standards before considering alternative models.