D4C5964-2

RF Circulators And Isolators Overview

The DiTom Microwave D4C5964-2 is an RF circulator designed for the 5.90 GHz to 6.40 GHz frequency range. It features a dual junction construction with SMA connectors, supporting an average forward power of 20 W. Key electrical specifications include an insertion loss of 0.3 dB, an isolation rating of 23 dB, and a voltage standing wave ratio (VSWR) of 1.15. The device operates within a temperature range of -30°C to +65°C and complies with RoHS3 standards.

RF Circulators And Isolators Feature Summary

• Dual junction circulator architecture
• SMA female connector configuration
• High isolation performance
• Low insertion loss design

RF Circulators And Isolators Applications

• RF signal routing in communication systems
• Transmitter-receiver separation
• Test and measurement equipment
• Microwave circuit protection

RF Circulators And Isolators Procurement Notes

Verify the specific connector gender and pin configuration against the official datasheet before integration. Confirm that the operating environment remains within the specified -30°C to +65°C thermal limits. Ensure the system power does not exceed the 20 W average forward power rating to prevent component damage. Check for RoHS3 compliance requirements if applicable to your assembly process.

RF Circulators And Isolators Selection Notes

Select this model when a dual junction circulator is required for the 5.9-6.4 GHz band. Compare insertion loss and isolation values against system noise figure requirements. Ensure SMA interface compatibility with existing PCB or cable assemblies. Consider the physical dimensions of 0.62 x 0.5 x 0.78 inches for enclosure space constraints.

RF Circulators And Isolators Part Context

This component belongs to the DiTom Microwave D4C5964 series of RF circulators. It shares the same frequency band and general electrical characteristics with variants like D4C5964-5 and D3C5964-3, differing primarily in internal junction topology and connector configurations. It serves as a passive non-reciprocal device for directing microwave signals.

RF Circulators And Isolators Replacement Considerations

Direct substitutes may include DiTom models D4C5964-5 or D3C5964-3, provided the connector types and junction structures match the application requirements. Verify that alternative part numbers maintain identical frequency ranges and power handling capabilities.