DLP-245PL-G

$55.25

Description：IC MOD PIC16F8722 24MHZ 3.75KB
Series：USB

SKU:d8928da9bc34 Category: Microcontrollers, Microprocessor, FPGA Modules Brand: DLP Design Inc.

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

Product Detailed Parameters

Description：IC MOD PIC16F8722 24MHZ 3.75KB
Series：USB
Mfr：DLP Design Inc.
Package：Bulk
Module/Board Type：MCU, USB Core
Core Processor：PIC16F8722
Co-Processor：FT245RL
Speed：24MHz
Flash Size：128KB
RAM Size：3.75KB
Connector Type：USB - B, Pin Header
Size / Dimension：2.800" L x 2.000" W (71.10mm x 50.80mm)
Operating Temperature：-

Download product information

DLP-245PL-G

Overview

The DLP-245PL-G is a USB-to-microcontroller module integrating an FTDI FT245RL FIFO chip and a Microchip PIC18LF8722 processor. It supports data transfer rates up to 2 megabits per second over USB 1.1 and 2.0 interfaces. The microcontroller provides 128K FLASH program memory, 3840 bytes of RAM, and 1024 bytes of data EEPROM. Peripheral capabilities include a multi-channel 10-bit A/D converter and extensive digital I/O lines. The device operates with a required 5V supply sourced from the USB port or external electronics.

Feature Summary

Integrates Microchip PIC18LF8722 microcontroller with FTDI FT245RL USB interface
Provides 50 digital I/O lines with 16 configurable as analog inputs
Includes 128K FLASH, 3840 bytes RAM, and 1024 bytes EEPROM
Features royalty-free Virtual COM Port and D2XX driver support

Applications

Prototype development
USB ISDN and ADSL modems
USB interface for digital cameras
High-speed USB instrumentation
USB smart-card readers

Procurement Notes

Verify that the specific part number includes the lead-free designation (G suffix) if environmental compliance is required. Confirm that the onboard firmware is preprogrammed with Token I/O functionality for immediate port access. Ensure compatibility with the intended host operating system versions supported by the provided VCP or D2XX drivers.

Selection Notes

Select this module when rapid prototyping of USB peripherals is necessary without deep USB protocol knowledge. The integrated FT245RL handles automatic USB protocol management. Consider the available 50 I/O lines and 10-bit ADC resolution against application requirements. Verify power configuration needs via jumpers JP1 and JP2 for bus-powered versus self-powered operation.

Part Context

This module serves as a rapid development tool combining a high-speed USB interface with a programmable microcontroller. It utilizes the same USB interface architecture found in the DLP-USB245M-G module but adds the PIC18LF8722 for enhanced peripheral control and data processing capabilities.