DLP3000FQBDH

Specialized ICS Overview

The DLP3000FQBDH is a digital micromirror device (DMD) from the DLP 0.3 WVGA series, designed for small form-factor applications. It features a 608 × 684 array of aluminum micromirrors with a 7.6-µm pitch, offering up to WVGA resolution. The device operates with ±12° tilt angles and supports high-speed pattern rates of 4000 Hz in binary mode and 120 Hz in 8-bit mode. It utilizes a 15-bit double data rate input bus with clock frequencies between 60 MHz and 80 MHz. The component is housed in a 50-pin LCCC package measuring 16.6 mm × 7.0 mm × 4.6 mm.

Specialized ICS Feature Summary

• 608 × 684 array of micromirrors with 7.6-µm pitch
• High-speed pattern rates: 4000 Hz (binary) and 120 Hz (8-bit)
• 15-bit DDR input data bus with 60–80 MHz clock rate
• Low power consumption at 200 mW typical

Specialized ICS Applications

• Machine Vision
• Industrial Inspection
• 3D Scanning
• Augmented Reality
• Spectroscopy

Specialized ICS Procurement Notes

Verify the specific suffix FQBDH against the manufacturer's orderable addendum to confirm exact packaging and qualification status. Ensure compatibility with the DLPC300 controller for reliable operation. Check thermal management requirements as the device dissipates heat primarily through the package back.

Specialized ICS Selection Notes

Select this component for applications requiring compact spatial light modulation. Ensure the optical system matches the 0.3-inch diagonal size and side illumination design. Verify that the host controller supports the required 15-bit DDR interface and voltage levels (VCC, VREF, VBIAS, VOFFSET, VRESET).

Specialized ICS Part Context

The DLP3000 is part of the DLP 0.3 WVGA chipset, paired with the DLPC300 controller. It is optimized for portable equipment where small form factor and lower cost are critical. The device is a latchable, electrical-in/optical-out semiconductor suitable for structured light and metrology.

Specialized ICS Replacement Considerations

Consult the DLPZ005 chipset datasheet for compatible controllers. No direct single-part replacements are listed; consider other DLP 0.3 series devices if pinout or performance differs.