DLW21HN900HQ2L

$0.36

Description：CMC 220MA 2LN 90 OHM SMD
Series：DLW21
Mfr：Murata Electronics
Package：Tape & Reel (TR),Cut Tape (CT)

SKU:e288e0dedefe Category: Common Mode Chokes Brand: Murata Electronics

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

DLW21HN900HQ2L is listed in the Common Mode Chokes range at ChipApex. The manufacturer field lists Murata Electronics. Its product description is CMC 220MA 2LN 90 OHM SMD. Review the specifications below when checking this part for your BOM.

Common Mode Chokes specifications for DLW21HN900HQ2L

Description：CMC 220MA 2LN 90 OHM SMD
Series：DLW21
Mfr：Murata Electronics
Package：Tape & Reel (TR),Cut Tape (CT)
Filter Type：Signal Line
Number of Lines：2
Current Rating (Max)：220mA
DC Resistance (DCR) (Max)：590mOhm
Voltage Rating - DC：20V
Voltage Rating - AC：-
Operating Temperature：-40°C ~ 85°C
Ratings：-
Approval Agency：-
Features：-
Mounting Type：Surface Mount
Size / Dimension：0.079" L x 0.047" W (2.00mm x 1.20mm)
Height (Max)：0.039" (1.00mm)
Package / Case：Horizontal, 4 PC Pad
Inductance @ Frequency：-
Impedance @ Frequency：90 Ohms @ 100 MHz
Qualification：-
Grade：-

Common Mode Chokes datasheet and documents for DLW21HN900HQ2L

DLW21HN900HQ2L

Common Mode Chokes Overview

The DLW21HN900HQ2L is a two-line common mode choke filter manufactured by Murata Electronics, designed for surface-mount PCB assembly. It operates within an impedance range of 90 Ohms at a test frequency of 100 MHz with a tolerance of 25%. The component supports a maximum DC current of 220 mA and exhibits a maximum DC resistance of 590 mOhms. It functions reliably across a temperature range from -40°C to +85°C. The device utilizes a wirewound construction housed in an unshielded 0805 (2012 metric) package measuring 2 mm x 1.2 mm x 0.9 mm.

Common Mode Chokes Feature Summary

Provides common mode noise suppression for differential signal lines using a two-line configuration.
Utilizes wirewound technology to achieve specified impedance characteristics at high frequencies.
Designed for direct surface-mount integration onto printed circuit boards.

Common Mode Chokes Applications

High-speed data line filtering in portable electronic devices
Noise suppression for USB interface circuits
Signal integrity enhancement in compact consumer electronics

Common Mode Chokes Procurement Notes

Verify the complete part number including suffixes against official manufacturer documentation to ensure correct impedance and current ratings. Confirm package dimensions and termination type match design requirements. Check for specific automotive or industrial qualification certifications if operating conditions exceed standard commercial limits. Ensure storage and handling procedures comply with moisture sensitivity levels defined in the datasheet.

Common Mode Chokes Selection Notes

Select this component when a low-profile 0805 footprint is required for common mode noise reduction on differential pairs. Evaluate the 220 mA current rating against peak operational loads to prevent saturation. Consider the 590 mOhm DC resistance impact on signal attenuation. Compare impedance values at target frequencies against EMI requirements. Verify thermal performance within the -40°C to +85°C operating range.

Common Mode Chokes Part Context

This component belongs to the EMIFIL DLW21 series of common mode chokes. The series offers various impedance options in a standardized 0805 surface-mount package. These filters are engineered for applications requiring effective noise suppression in space-constrained environments. The DLW21HN900HQ2L specifically targets circuits needing 90 Ohms impedance at 100 MHz.