DLW5BSM601TQ2L

Common Mode Chokes Overview

The DLW5BSM601TQ2L is a two-line common mode choke coil manufactured by Murata Electronics, designed for surface mount applications. It operates within an impedance range of 600 Ohms with a tolerance of 40% at 100 MHz. The component supports a maximum DC current of 1.4 A and features a maximum DC resistance of 120 mOhms. It functions reliably across a temperature range from -40°C to +105°C. The physical dimensions are 5 mm in length, 5 mm in width, and 4.5 mm in height, housed in a 2020 package.

Common Mode Chokes Feature Summary

• Provides effective noise suppression for electromagnetic interference (EMI) and electromagnetic compatibility (EMC) issues in electronic circuits.
• Designed for filtering power and signal lines using a wire-wound chip structure.
• Supports surface mount installation for automated PCB assembly processes.

Common Mode Chokes Applications

• Power line filtering
• Signal line filtering
• EMI noise suppression

Common Mode Chokes Procurement Notes

Verify the specific part number against official Murata documentation to ensure accuracy. Confirm that the required impedance, current rating, and physical package dimensions align with the design specifications. Check for RoHS compliance status if environmental regulations apply to the manufacturing process. Ensure the supplier provides valid traceability documents for quality assurance purposes.

Common Mode Chokes Selection Notes

Select this component when designing circuits requiring common mode noise reduction for dual-line configurations. Consider the 1.4 A current rating and 120 mOhm resistance for power efficiency requirements. Evaluate the 2020 package size against available PCB real estate constraints. Verify thermal performance capabilities within the specified operating temperature range during system integration.

Common Mode Chokes Part Context

This component belongs to the DLW5B series of wire-wound chip common mode chokes produced by Murata Electronics under the EMIFIL trademark. The series focuses on providing compact solutions for EMI/EMC challenges in modern electronics. The DLW5BSM601TQ2L variant specifically addresses needs for moderate current handling with defined impedance characteristics at high frequencies.

Common Mode Chokes Replacement Considerations

Consult official Murata documentation for verified substitute part numbers. Cross-reference impedance values, current ratings, and physical dimensions before substitution. Ensure any alternative component meets the same electrical and mechanical specifications for direct replacement.

Common Mode Chokes FAQ

What is the impedance value of the DLW5BSM601TQ2L?

The impedance is 600 Ohms at 100 MHz.

What is the maximum DC current rating?

The maximum DC current rating is 1.4 A.

What is the physical package size?

The component uses a 2020 package with dimensions of 5 mm x 5 mm x 4.5 mm.