DMA5610F0R

Overview

The Panasonic DMA5610F0R is a dual PNP pre-biased digital transistor housed in an SMini5-F3-B package. It features integrated base resistors, with a typical input resistance of 4.7 kOhms. The device supports a maximum collector-emitter voltage (VCEO) of -50 V and a continuous collector current of -100 mA. Operating temperatures reach up to +150 C. This component simplifies circuit design by combining two transistors with biasing networks in a compact surface-mount footprint.

Feature Summary

• Dual PNP configuration with integrated pre-biasing for simplified switching applications
• Compact SMini5-F3-B surface-mount package suitable for space-constrained designs
• High thermal stability supporting operation at elevated temperatures up to 150 C

Applications

• General-purpose signal switching circuits
• Driver stages for low-power loads
• Logic level translation interfaces

Procurement Notes

Verify availability status carefully as the component may be subject to discontinuation or limited supply conditions. Confirm RoHS compliance details through official datasheets prior to procurement. Ensure the specific ordering suffix matches project requirements. Cross-reference part numbers with authorized distributors to avoid counterfeit sources. Validate package dimensions against PCB layout constraints before finalizing orders.

Selection Notes

Select this component when a dual PNP solution with built-in biasing is required to reduce external resistor count. The 4.7 kOhm base resistor value suits standard logic interface speeds. Consider the -50 V rating for low-voltage control applications. The SMini5 package offers a balance between thermal performance and board space efficiency compared to larger discrete packages.

Part Context

This part belongs to Panasonic's digital transistor family, which integrates bipolar junction transistors with internal bias resistors. These components replace multiple discrete parts, reducing assembly complexity and improving reliability. The DMA series specifically targets applications requiring compact, high-speed switching with minimal external component count.

Replacement Considerations

• DMA561010R

FAQ

What is the base resistor value for the DMA5610F0R?

The typical input base resistor value is 4.7 kOhms.

Is the DMA5610F0R available in a leaded package?

No, it is exclusively available in the SMini5-F3-B surface-mount package.