DS1010S-200

Overview

The DS1010S-200 is a 10-tap silicon delay line manufactured by Analog Devices Inc./Maxim Integrated, housed in a 16-pin SOIC package. It provides a total delay of 200 ns with a tap increment of 20 ns. The device operates on a single 5V supply (4.75V to 5.25V) and functions within an operating temperature range of 0°C to 70°C. It features low-power CMOS technology with TTL/CMOS-compatible logic levels. Each tap can drive up to 10 74LS type loads, and the input pulse width must be at least 40% of the TAP 10 delay.

Feature Summary

• Provides ten equally spaced output taps for precise time delay applications
• Ensures equal precision for both leading and trailing edge transitions
• Offers economical all-silicon replacement for older hybrid delay line techniques
• Supports surface mount installation via standard 16-pin SOIC packaging

Applications

• Timing circuits requiring fixed signal delays
• Pulse stretching and shaping networks
• Clock distribution systems needing specific phase offsets

Procurement Notes

Verify component authenticity through authorized distributors or direct manufacturer channels. Confirm that the 16-pin SOIC package matches the required PCB footprint. Check for RoHS compliance status as historical data indicates non-compliance for some variants. Ensure proper handling procedures are followed during assembly due to the surface mount format.

Selection Notes

Select this model when a fixed 200 ns total delay with 20 ns per tap increments is required. Compare against other dash-number variants if different delay values are needed. Consider the 14-pin DIP version if through-hole mounting is preferred over surface mount technology. Verify that the load requirements do not exceed the specified drive capability of ten 74LS loads per tap.

Part Context

This component belongs to the DS1010 series of 10-tap silicon delay lines. The 'S' suffix denotes the 16-pin SOIC surface mount package variant, while the '-200' suffix specifies the 200 ns total delay characteristic. The series is designed to replace hybrid delay lines with a more cost-effective silicon solution.

Replacement Considerations

Direct pin-compatible replacements include other DS1010 series variants with different delay values. For equivalent functionality in a different package, consider the standard 14-pin DIP versions. No specific substitute part numbers are confirmed in public documentation.