DS4106BN+

Programmable Timers And Oscillators Overview

The DS4106BN+ is a ceramic surface-mount crystal oscillator from the Maxim DS4-XO series, generating a fixed output frequency of 106.25MHz. It utilizes fundamental crystal technology combined with PLL circuitry to achieve low jitter and phase noise performance. The device features LVDS differential outputs and operates on a single +3.3V ±10% supply voltage. Typical supply current is 53mA at +3.3V. It is housed in a compact 10-pin LCCC package measuring 5.0mm x 3.2mm x 1.49mm and supports an operating temperature range of -40°C to +85°C.

Programmable Timers And Oscillators Feature Summary

• Fixed clock output frequency of 106.25MHz
• LVDS differential output configuration
• Typical RMS phase jitter of <0.9ps (12kHz to 20MHz)
• Total frequency stability of ±39ppm over temperature, aging, load, and supply

Programmable Timers And Oscillators Applications

• Fibre Channel Hard Disk Drives
• Host Bus Adapters
• Raid Controllers
• Fibre Channel Switches

Programmable Timers And Oscillators Procurement Notes

Verify component authenticity through authorized channels. Confirm lead-free status via JESD97 category e4 (Au over Ni) finish specifications. Ensure compatibility with both lead-based and lead-free soldering processes during assembly. Check for RoHS compliance documentation prior to procurement.

Programmable Timers And Oscillators Selection Notes

Select the DS4106BN+ specifically for applications requiring LVDS outputs at 106.25MHz. For LVPECL outputs at this frequency, choose the DS4106AN+. Verify that the system power supply remains within the 3.0V to 3.6V range to maintain specified electrical characteristics and frequency stability.

Programmable Timers And Oscillators Part Context

This component belongs to the Maxim Integrated DS4-XO series of precision clock oscillators. It shares the same physical package and general architecture with the DS4212BN+ (212.50MHz) and DS4425BN+ (425.00MHz). The 'B' suffix denotes the LVDS output type, while 'A' denotes LVPECL.

Programmable Timers And Oscillators Replacement Considerations

Direct functional substitutes within the same family include the DS4106AN+ for LVPECL applications. Other frequencies in the series are DS4212BN+ and DS4425BN+. Cross-family replacements require verification of output voltage levels and pin compatibility.

Programmable Timers And Oscillators FAQ

What is the state of the LVDS outputs when disabled?

When the OE pin is logic-low or connected to GND, the LVDS outputs latch to a differential logic one, with OUTP held high and OUTN held low.

How does the exposed paddle function?

The exposed paddle (EP) must not be connected electrically, and no exposed metal should be placed under the pad location.

What is the typical oscillation startup time?

The oscillation startup time, including PLL acquisition, is typically 10ms after VCC reaches 3.0V from power-on.