DS4M200D+33

Programmable Timers And Oscillators Overview

The DS4M200D+33 is a 3.3V margining clock oscillator with LVDS outputs, manufactured by Analog Devices Inc./Maxim Integrated. It operates within a temperature range of -40°C to +85°C and utilizes a 10-pin LCCC package (5mm x 3.2mm). The device generates a nominal frequency of 200MHz using a low-jitter PLL, achieving typical phase jitter of less than 0.9ps RMS from 12kHz to 20MHz. Frequency margining allows for ±5% deviation control via the MS pin. Operating current reaches up to 75mA at 3.3V.

Programmable Timers And Oscillators Feature Summary

• Frequency Margining: ±5% deviation controlled by three-level voltage on MS pin
• Nominal Output Frequency: 200MHz with < 0.9ps RMS jitter (12kHz to 20MHz)
• Output Interface: LVDS differential driver with internal pullup/pulldown resistors
• Package: 10-lead Ceramic LCCC (5mm x 3.2mm) with exposed paddle

Programmable Timers And Oscillators Applications

• Memory Clocks
• RAID Systems

Programmable Timers And Oscillators Procurement Notes

Verify component authenticity through authorized channels due to discontinued status. Confirm lead finish compatibility (JESD97 category e4) for soldering processes. Check RoHS compliance documentation. Ensure proper handling of the ceramic LCCC package during assembly.

Programmable Timers And Oscillators Selection Notes

Select this model when a 200MHz LVDS output is required with frequency margining capabilities. Compare against DS4M200P+33 if LVPECL outputs are preferred instead. Verify power supply stability as the device draws up to 75mA. Ensure thermal management for the 10 LCCC package in enclosed environments.

Programmable Timers And Oscillators Part Context

Part of the DS4M125/DS4M133/DS4M200 family of margining clock oscillators. The 'D' suffix indicates LVDS output type, while 'P' denotes LVPECL. The '+33' suffix specifies 3.3V operation and lead-free packaging. These devices integrate an oscillator and PLL to form complete clock solutions with fundamental-mode crystals.

Programmable Timers And Oscillators Replacement Considerations

No direct public substitute part numbers are confirmed in the provided datasheet. Consider DS4M200P+33 for LVPECL requirements or DS4M125/DS4M133 series for different nominal frequencies. Verify pinout and electrical characteristics match before substitution.