EC2600TS-24.576M TR

Oscillators Overview

The EC2600TS-24.576M TR is a CMOS Quartz Crystal Clock Oscillator (XO) manufactured by Ecliptek, operating at a nominal frequency of 24.576 MHz. It utilizes an LVCMOS output interface and requires a 3.3 Vdc supply voltage with a tolerance of ±10%. The device features a 4-pad surface mount package measuring 5.0 mm x 7.0 mm in ceramic construction. Key electrical specifications include a maximum frequency tolerance of ±100 ppm, a duty cycle of 50% ±10%, and a maximum input current of 10 mA. It supports tri-state control for enable/disable functionality and operates within a temperature range of -10°C to +70°C.

Oscillators Feature Summary

• Generates a precise 24.576 MHz clock signal using CMOS technology
• Provides LVCMOS logic levels compatible with standard digital interfaces
• Includes tri-state output control for system power management

Oscillators Applications

• General-purpose digital clock generation in consumer electronics
• Timing reference for microcontrollers and processors
• Data communication interface synchronization

Oscillators Procurement Notes

Verify the specific frequency tolerance requirement of ±100 ppm against your system design constraints, as this model differs from higher precision variants like the EC2645TS series which offers ±50 ppm. Confirm that the 3.3V supply voltage aligns with your board's power rails. Ensure the 5.0mm x 7.0mm ceramic footprint fits your PCB layout. Check RoHS compliance status if required by your manufacturing standards.

Oscillators Selection Notes

Select this component when a cost-effective, standard-tolerance oscillator is sufficient for non-critical timing applications. It is suitable for designs where ±100 ppm stability meets the jitter budget. Consider alternative models such as the EH3645ETTTS series if a wider industrial temperature range (-40°C to +85°C) or smaller 3.2mm x 5.0mm package is required. Evaluate the EMRA series if MEMS technology or lower aging rates are necessary.

Oscillators Part Context

This part belongs to Ecliptek's standard XO oscillator family, designed for surface-mount assembly. It shares the LVCMOS output architecture with other series like EC2645TS but distinguishes itself through its specific ±100 ppm tolerance specification and 3.3V operation. The 4-pin ceramic SMD package provides mechanical stability for automated placement processes.

Oscillators Replacement Considerations

Direct substitutes may include the EC2645TS-24.576M TR, though it offers tighter ±50 ppm tolerance. For pin-compatible alternatives with different electrical characteristics, consider the EH3645ETTTS-24.576M TR for extended temperature ranges or the EH4720TS-24.576M for 2.5V operation.