EC2600TS-50.000M TR

Oscillators Overview

The Ecliptek EC2600TS-50.000M TR is a surface-mount LVCMOS crystal oscillator operating at a nominal frequency of 50.000 MHz. It utilizes a 4-pad, 5mm x 7mm ceramic package and requires a 3.3V supply voltage with ±10% tolerance. The device supports tri-state functionality via Pin 1 for enable/disable control. Frequency stability is rated at ±100 ppm maximum, inclusive of calibration tolerance, temperature range, supply voltage change, output load change, first-year aging, shock, and vibration. The operational temperature range spans from -10°C to +70°C.

Oscillators Feature Summary

• Supports tri-state control on Pin 1 for high-impedance shutdown mode
• Provides comprehensive frequency stability specification covering all environmental and electrical conditions
• Utilizes lead-free ceramic SMD packaging compliant with RoHS standards

Oscillators Applications

• Industrial edge gateways requiring stable reference clocks
• Serial communication modules such as RS485 interfaces
• Consumer electronics utilizing standard digital logic circuits

Oscillators Procurement Notes

Verify the specific suffix 'TR' indicates tape and reel packaging configuration when sourcing components. Confirm that the requested part matches the exact model number including the frequency designation. Ensure compatibility with standard reflow soldering profiles specified in the manufacturer datasheet. Check for compliance with current environmental regulations such as RoHS and REACH requirements before final procurement approval.

Oscillators Selection Notes

Select this component when a 50MHz clock signal is required within a -10°C to +70°C environment. The ±100 ppm total stability rating simplifies design margins by accounting for all drift factors. The 3.3V supply voltage aligns with common digital logic families. Consider the 5mm x 7mm footprint for PCB layout constraints. The tri-state feature allows for power management without additional switching circuitry.

Oscillators Part Context

This oscillator belongs to the EC26 Series, which features ceramic surface-mount packages designed for general-purpose clock applications. The series offers various frequencies and stability grades. The TS suffix denotes the tri-state capability. This specific model provides a balance of moderate stability and wide operating temperature suitable for industrial and consumer markets.

Oscillators Replacement Considerations

Direct substitutes must match the 50MHz frequency, 3.3V supply, LVCMOS output, and 5x7mm ceramic package. Verify equivalent ±100 ppm stability over the same temperature range. Ensure the replacement also includes tri-state functionality if system power management depends on it.