ECMT1V2023S-600-R

Common Mode Chokes Overview

The ECMT1V2023S-600-R is a single-channel common mode choke manufactured by Eaton Electronics. It features through-hole mounting and an unshielded design. The component provides an inductance of 60 mH at 1 kHz with a maximum DC current rating of 400 mA. Its maximum DC resistance is 2.1 Ohms, and it exhibits a self-resonant frequency of 96 kHz. The unit operates within a temperature range of -40°C to +125°C. Physical dimensions are 23 mm in length, 20 mm in width, and 17.5 mm in height.

Common Mode Chokes Feature Summary

• Provides common mode noise suppression for power lines
• Designed for standard through-hole PCB mounting
• Unshielded construction suitable for general electromagnetic interference reduction

Common Mode Chokes Applications

• Power line filtering in electronic equipment
• Common mode noise suppression in AC/DC circuits
• Electromagnetic interference mitigation in consumer electronics

Common Mode Chokes Procurement Notes

Verify the complete part number including suffixes to ensure correct inductance and tolerance specifications. Confirm that the through-hole package dimensions match the target PCB footprint. Check insulation resistance and withstand voltage ratings against system safety requirements. Ensure operating temperature limits align with the intended application environment. Validate manufacturer authenticity through authorized distribution channels.

Common Mode Chokes Selection Notes

Select this component when a 60 mH inductance value is required for common mode noise attenuation. Consider the 400 mA current rating to ensure adequate margin for the specific circuit load. Evaluate the 2.1 Ohm DC resistance impact on signal integrity or power loss. Assess the physical size constraints relative to the available board space. Compare performance metrics against alternative chokes if higher current handling or different inductance values are needed.

Common Mode Chokes Part Context

This component belongs to the ECMT series of common mode chokes from Eaton Electronics. These devices are engineered for general-purpose electromagnetic interference suppression. The series offers various inductance values and current ratings to suit different circuit requirements. They are commonly used in applications requiring reliable noise filtering for power and signal lines.

Common Mode Chokes Replacement Considerations

Direct substitutes must match the 60 mH inductance, 400 mA current rating, and 2.1 Ohm DC resistance. Verify compatibility of the through-hole package dimensions and pin configuration. Ensure equivalent thermal and electrical performance characteristics are maintained.