EL2630S1(TA)-V

Logic Output Optoisolators Overview

The EL2630S1(TA)-V is a dual-channel logic output optocoupler manufactured by Everlight Electronics. It features an open collector output configuration with a maximum data rate of 10 MBps and a propagation delay of 100 ns. The device provides high isolation voltage of 5000 Vrms and a common mode transient immunity (CMTI) of 5 kV/µs. It operates within a temperature range of -40 °C to 100 °C and is housed in an 8-SMD, Gull Wing package.

Logic Output Optoisolators Feature Summary

• Dual-channel architecture for independent signal isolation
• High-speed logic output with 10 MBps data rate capability
• Robust insulation performance with 5000 Vrms isolation voltage
• Enhanced noise immunity via 5 kV/µs common mode transient rejection

Logic Output Optoisolators Applications

• Industrial communication bus interfaces
• Microcontroller input/output isolation
• Signal transmission in noisy electrical environments

Logic Output Optoisolators Procurement Notes

Verify the specific suffix designation against the manufacturer's current product portfolio to ensure alignment with the latest datasheet specifications. Confirm that the 8-SMD Gull Wing package variant matches the intended PCB footprint requirements. Cross-reference the CMTI rating and isolation voltage parameters with system safety standards before finalizing component selection for critical applications.

Logic Output Optoisolators Selection Notes

Select this component when dual-channel isolation is required alongside high-speed digital signal transmission. The open collector output necessitates external pull-up resistors; ensure supply voltage compatibility with the load circuit. Consider the 5 kV/µs CMTI rating for systems exposed to rapid voltage transients. Verify thermal management capabilities within the specified -40 °C to 100 °C operating range.

Logic Output Optoisolators Part Context

This part belongs to the EL2630 series of logic output optocouplers from Everlight Electronics. The series includes variants such as the through-hole EL2630-V and surface-mount EL2630S1(TA)-V. These devices are designed for general-purpose digital isolation, offering a balance of speed and reliability for embedded systems and industrial control applications requiring galvanic separation.

Logic Output Optoisolators Replacement Considerations

Publicly confirmed substitute part numbers for the EL2630S1(TA)-V are not available in the provided documentation. Evaluate alternative dual-channel logic output optocouplers with matching 5000 Vrms isolation, 10 MBps speed, and 8-SMD packaging only after verifying pinout compatibility and electrical parameter equivalence.