EM-6022L-38

Microphones Overview

The EM-6022L-38 is an analog electret condenser microphone manufactured by Soberton Inc. It features an omnidirectional polar pattern with a frequency range of 50 Hz to 10 kHz. The device operates at a supply voltage of 2V and draws a supply current of 500 µA. Sensitivity is rated at -38dB ±3dB @ 94dB SPL, with a signal-to-noise ratio of 67 dB. It supports a maximum input sound pressure level of 110 dB. The physical dimensions are 6.00mm in diameter (0.236 inches). Termination is provided via a 50mm wire with a connector.

Microphones Feature Summary

• Omnidirectional acoustic design for uniform sound capture from all directions
• Analog output type suitable for standard audio processing circuits
• Integrated capacitor structure within the electret condenser element

Microphones Applications

• General purpose voice recording devices
• Consumer audio equipment requiring omnidirectional pickup
• Industrial communication systems utilizing analog microphone interfaces

Microphones Procurement Notes

Verify the specific termination configuration, as the part utilizes a 50mm wire with a connector rather than surface mount pads. Confirm that the 2V supply voltage requirement aligns with your system's power rails. Ensure the IP50 rating meets environmental protection needs for the intended deployment location.

Microphones Selection Notes

Select this component when an omnidirectional response is required for broad sound field capture. The analog output necessitates compatible pre-amplification circuitry. Consider the 50Hz lower frequency limit if low-frequency bass reproduction is critical for the application.

Microphones Part Context

This model belongs to Soberton Inc.'s line of electret condenser microphones. It shares the 6mm diameter form factor with other variants in the series but differs in sensitivity ratings and termination styles. The 'L' designation typically indicates specific lead or wire configurations compared to other suffixes.

Microphones Replacement Considerations

Direct substitutes may include other 6mm omnidirectional electret microphones with similar -38dB sensitivity and 2V operation. Verify pinout compatibility if replacing in existing assemblies. Cross-reference with EM-6022P for structural similarities, though electrical characteristics may vary.