EM-6050P

Microphones Overview

The EM-6050P is an omnidirectional electret condenser microphone manufactured by Soberton Inc. It features a frequency range of 100Hz to 20kHz and operates with a rated voltage of 2V, supporting a supply range of 1V to 10V. The device exhibits a sensitivity of -42dB ±3dB at 94dB SPL. Its physical dimensions include a diameter of 0.236 inches (6.00mm) and a maximum height of 0.213 inches (5.40mm). Termination is provided via PC pins with a spacing of 2.8mm.

Microphones Feature Summary

• Omnidirectional acoustic response for uniform sound capture from all directions
• Electret condenser transducer technology for analog audio signal generation
• Top port location design facilitating direct sound entry

Microphones Applications

• Consumer electronic audio input devices
• Voice recognition systems
• General purpose sound detection circuits

Microphones Procurement Notes

Verify the specific datasheet version for the exact sensitivity tolerance and impedance characteristics, as values may vary slightly between production batches. Confirm that the PC pin pitch matches the target PCB footprint. Ensure the operating voltage remains within the specified 1V to 10V range to prevent damage or distortion. Check for any RoHS compliance documentation if required for your manufacturing standards.

Microphones Selection Notes

Select this component when an omnidirectional analog microphone is required for compact audio applications. The 6.00mm diameter allows for integration into space-constrained enclosures. The wide supply voltage range offers flexibility in circuit design compared to fixed-voltage MEMS alternatives. Consider the top-port configuration for optimal acoustic coupling in sealed housings.

Microphones Part Context

This part belongs to the EM series of electret microphones from Soberton Inc., designed for general-purpose audio sensing. Electret condenser microphones are known for their high sensitivity and low noise floor relative to dynamic microphones. This specific model utilizes a standard PC pin termination, distinguishing it from surface-mount variants found in modern portable electronics.

Microphones Replacement Considerations

Direct replacements must match the 6.00mm diameter and PC pin configuration. Verify that substitute parts maintain the -42dB sensitivity level and 100Hz-20kHz frequency response. Ensure the replacement supports the same 2V rated voltage to avoid biasing issues in existing amplifier circuits.