F88T124GVP

Overview

The Hoffman Enclosures Inc. F88T124GVP is a Type 1 straight section wireway designed for routing and protecting electrical wiring in low-exposure environments. Constructed from 14/16 gauge steel, it features an ANSI 61 gray polyester powder painted finish. The unit measures 8 inches wide by 8 inches high with a length of 24 inches. It utilizes a lay-in flat cover design to facilitate easy access for wire installation and maintenance.

Feature Summary

• Lay-in flat cover design allows for quick and easy access to internal wiring without removing the entire cover assembly.
• Constructed from durable 14/16 gauge steel body and cover for structural integrity.
• ANSI 61 gray polyester powder painted finish provides corrosion resistance and aesthetic consistency.
• Type 1 rating offers protection against falling dirt and limited ingress of water.

Applications

• Enclosing wire and cable in standard wireway runs.
• Routing electrical wiring in industrial environments with low exposure to dust, dirt, oil, or water.
• Protecting electrical infrastructure in indoor commercial settings.

Procurement Notes

Verify that the required NEMA Type 1 rating aligns with environmental conditions, as this model does not provide protection against water jets or significant dust ingress. Confirm that the 8x8 inch cross-section accommodates the total volume of conductors according to applicable electrical codes. Ensure the 24-inch length fits the planned run geometry. Check for compatibility with existing Hoffman wireway fittings and supports.

Selection Notes

Select this model when a straight section is needed for horizontal or vertical wire routing in controlled indoor environments. The 8x8 inch dimensions are suitable for moderate conductor counts. Consider the lay-in cover mechanism if frequent access is anticipated. Compare with screw-on cover variants if higher security or tighter sealing is required. Verify gauge requirements against mechanical load expectations.

Part Context

This component belongs to the nVent HOFFMAN wireway system, which includes various straight sections, elbows, and tees. The F88T124GVP specifically addresses the need for accessible, protected pathways for electrical cables in general industrial applications. It complements other Type 1 wireway components to create continuous raceways.

Replacement Considerations

Direct substitutes include other Hoffman Type 1 straight wireways with identical 8x8x24 inch dimensions and lay-in covers. Verify material gauge and finish specifications match to ensure consistent performance and appearance within the installed system.

FAQ

What is the specific NEMA rating for the F88T124GVP?

It is rated NEMA Type 1, providing protection against falling dirt and limited ingress of water.

How is the cover secured on this wireway section?

It features a lay-in flat cover design, allowing the cover to be placed directly onto the frame without screws for basic access.

What material is used for the construction of this wireway?

The body and cover are constructed from 14/16 gauge steel with an ANSI 61 gray polyester powder painted finish.