FB03YTYN252

Chip Ferrite Bead Overview

FB03YTYN252 is a ferrite bead from the FB series by Stackpole Electronics Inc. It features an impedance of 2.5 kOhms at 100 MHz and a maximum DC resistance of 1.3 Ohms. The component supports a current rating of 50 mA and utilizes a 0603 (1608 Metric) surface-mount package.

Chip Ferrite Bead Feature Summary

• Offers impedance over a broad frequency range
• Standard chip bead used to suppress lower frequency and lower current signals

Chip Ferrite Bead Applications

• Suppression of lower frequency signals
• Suppression of lower current signals

Chip Ferrite Bead Procurement Notes

Verify the specific impedance value and current rating against the official datasheet for the target application. Confirm that the 0603 package dimensions align with the PCB footprint requirements. Ensure the selected supplier provides documentation confirming compliance with relevant material standards.

Chip Ferrite Bead Selection Notes

Select this component when broadband suppression of low-frequency noise is required in space-constrained designs. The 50 mA current rating limits suitability to low-current signal lines rather than power paths. Evaluate the 1.3 Ohm DC resistance impact on circuit performance before integration.

Chip Ferrite Bead Part Context

The FB series represents standard ferrite beads designed for electromagnetic interference suppression. This specific model targets applications requiring effective noise reduction in compact surface-mount layouts, providing a balance between impedance performance and physical size constraints typical of modern electronics.

Chip Ferrite Bead Replacement Considerations

Direct substitutes must match the 0603 package, 2.5 kOhms impedance at 100 MHz, and 50 mA current rating. Verify compatibility with existing PCB footprints and thermal profiles during replacement.