FB060303T-241Y-S

Chip Ferrite Bead Overview

FB060303T-241Y-S is a signal line ferrite bead manufactured by Cal-Chip Electronics, Inc. It features an impedance of 240 Ohms at 100 MHz and supports a current rating of 200 mA with a maximum DC resistance of 800 mOhm. The component utilizes a 0201 (0603 Metric) surface mount package, measuring 0.024 inches in length and 0.012 inches in width. Designed for single-line applications, it operates within standard commercial temperature ranges and complies with RoHS3 regulations.

Chip Ferrite Bead Feature Summary

• Provides electromagnetic interference suppression through high impedance characteristics at target frequencies
• Compact 0201 footprint enables dense circuit board layout optimization
• Low DC resistance minimizes power loss in signal paths
• Single-line configuration simplifies integration into data transmission circuits

Chip Ferrite Bead Applications

• High-speed digital signal line filtering
• Clock signal noise suppression
• USB and communication interface protection

Chip Ferrite Bead Procurement Notes

Verify the specific impedance tolerance and current derating curves against your application requirements before finalizing the design. Confirm that the 0201 package dimensions align with your PCB land pattern specifications. Ensure the 200 mA current rating meets the peak operational demands of the signal line to prevent performance degradation or thermal issues during sustained operation.

Chip Ferrite Bead Selection Notes

Select this component when space constraints require a 0201 ferrite bead for signal integrity management. The 240 Ohm impedance value is suitable for attenuating high-frequency noise on low-current signal lines. Consider the 800 mOhm DC resistance impact on signal voltage levels if driving sensitive loads. This part is appropriate for general-purpose EMI suppression where compact size and moderate current handling are prioritized over high-power capabilities.

Chip Ferrite Bead Part Context

This ferrite bead belongs to the FB060303T series from Cal-Chip Electronics, Inc., which offers various impedance values in the same 0201 package. The series is designed for surface mount technology, providing consistent performance across different frequency attenuation needs. It complements other passive components in maintaining signal quality in modern electronic devices requiring effective noise control in minimal spaces.

Chip Ferrite Bead Replacement Considerations

Substitute parts must match the 240 Ohm impedance at 100 MHz, 200 mA current rating, and 0201 package dimensions. Verify equivalent DC resistance and material composition to ensure similar frequency response characteristics. Check manufacturer datasheets for any differences in mounting recommendations or environmental ratings.