FB060303T-500Y-S

Chip Ferrite Bead Overview

FB060303T-500Y-S is a ferrite bead manufactured by Cal-Chip Electronics, Inc. in the 0201 (0603 metric) surface-mount package. It exhibits an impedance of 50 Ohms at 100 MHz with a maximum DC resistance of 300 mOhm and a current rating of 300 mA.

Chip Ferrite Bead Feature Summary

• Provides signal filtering through high-frequency impedance characteristics
• Supports compact circuit layouts via small surface-mount footprint
• Maintains low DC resistance to minimize power loss in series applications

Chip Ferrite Bead Applications

• High-speed data line noise suppression
• Clock signal filtering
• Power supply decoupling for sensitive ICs

Chip Ferrite Bead Procurement Notes

Verify the specific impedance tolerance and current rating requirements against the official datasheet before procurement. Confirm that the 0201 package dimensions align with the PCB land pattern design. Ensure the selected supplier provides traceable documentation for RoHS compliance status.

Chip Ferrite Bead Selection Notes

Select this component when space constraints require a 0201 footprint. Evaluate the 300 mA current handling capability against the peak operating current of the target circuit. Compare the 50 Ohm impedance profile at 100 MHz with alternative ferrite beads to ensure adequate attenuation for the specific noise frequencies present in the application.

Chip Ferrite Bead Part Context

This ferrite bead belongs to the FB series from Cal-Chip Electronics, designed for general-purpose EMI suppression in portable electronics. The 0201 size allows for high-density board assembly. It serves as a passive component to attenuate high-frequency electromagnetic interference without introducing significant voltage drop under normal operating conditions.

Chip Ferrite Bead Replacement Considerations

Substitute only with components sharing identical 0201 dimensions, 50 Ohm impedance at 100 MHz, and minimum 300 mA current rating. Verify that any replacement maintains the same DC resistance limit of 300 mOhm to prevent circuit performance degradation.