FB100505T-601Y-S-1

Chip Ferrite Bead Overview

The FB100505T-601Y-S-1 is a multilayer ferrite chip bead manufactured by Cal-Chip Electronics, Inc. It operates as a single-function EMI suppressor in a surface-mount 0402 (1005 Metric) package with dimensions of 1.0 mm length, 0.5 mm width, and 0.5 mm height. The component provides an impedance of 600 Ohms at 100 MHz and supports a maximum current rating of 300 mA. Its maximum DC resistance is specified at 600 mOhm. Designed for flow, reflow, and wave soldering, it offers high impedance for volume attenuation.

Chip Ferrite Bead Feature Summary

• Multilayer ferrite construction providing strong electrode strength and solder heat resistance
• Surface mount design eliminates the need for wiring to achieve EMI/RFI attenuation
• Optimized for compatibility with standard surface mounting equipment processes

Chip Ferrite Bead Applications

• EMI/RFI suppression in electronic equipment
• Signal line filtering in compact circuit boards
• Noise reduction in portable devices requiring 0402 footprint

Chip Ferrite Bead Procurement Notes

Verify the manufacturer designation as Cal-Chip Electronics, Inc. when sourcing this component. Confirm the package type matches the 0402 (1005 Metric) specification and that the impedance value aligns with the required 600 Ohm performance at 100 MHz. Ensure the current rating meets the circuit's operational demands of up to 300 mA. Check for RoHS compliance status if environmental regulations apply to the final assembly.

Chip Ferrite Bead Selection Notes

Select this component when space constraints require a 0402 footprint for EMI suppression. It is suitable for applications needing 600 Ohms of impedance at 100 MHz with a current capacity of 300 mA. Consider its low DC resistance of 600 mOhm for minimal signal loss. Evaluate its thermal stability across the -55°C to 125°C operating range against the specific environmental conditions of the target device.

Chip Ferrite Bead Part Context

This ferrite chip belongs to the FB series of multilayer EMI suppressors from Cal-Chip Electronics. These components utilize magnetic material technology to provide attenuation without additional wiring. The series is designed for various surface mount applications, offering reliability through tested electrode strength and solderability suitable for automated manufacturing processes.

Chip Ferrite Bead Replacement Considerations

Publicly confirmed substitute part numbers are not available in the provided documentation. Verify electrical parameters such as impedance, current rating, and package dimensions before considering alternative manufacturers or generic equivalents.