FB10YTYH600

Chip Ferrite Bead Overview

FB10YTYH600 is a power line ferrite bead manufactured by Stackpole Electronics Inc. It features a 1210 (3225 Metric) surface mount package with two terminals. The component provides an impedance of 60 Ohms at 100 MHz and supports a current rating of 4A. Its DC resistance is specified as 25mΩ. The device is designed for noise suppression in power circuits.

Chip Ferrite Bead Feature Summary

• Engineered for power line noise suppression applications
• High current handling capability rated at 4A
• Low DC resistance to minimize signal loss

Chip Ferrite Bead Applications

• Power supply output filtering
• DC-DC converter noise reduction
• Signal integrity enhancement in high-current paths

Chip Ferrite Bead Procurement Notes

Verify the specific impedance value at 100 MHz against your circuit requirements. Confirm that the 4A current rating exceeds your maximum operational load. Ensure the 1210 footprint matches your PCB layout. Check RoHS compliance status if required by your manufacturing standards.

Chip Ferrite Bead Selection Notes

Select this component when low DC resistance is critical for efficiency. The 1210 package offers a balance between current capacity and board space. Verify that the 60 Ohm impedance at 100 MHz aligns with the target noise frequency spectrum. Ensure the 4A rating accommodates peak current demands without saturation.

Chip Ferrite Bead Part Context

This ferrite bead belongs to Stackpole's FB series, which focuses on surface mount noise suppression solutions. The FB10YTYH600 variant specifically targets high-current applications requiring minimal voltage drop. It serves as a passive component for electromagnetic interference mitigation in modern electronic assemblies.

Chip Ferrite Bead Replacement Considerations

PMH1210-500 is identified as an equivalent part offering similar performance characteristics including 4A current rating and reduced DC resistance.