FB160808T-300Y-S-2

$0.15

Description：FERRITE BEAD 30 OHM 0603 1LN
Series：FB
Mfr：Cal-Chip Electronics, Inc.
Package：Tape & Reel (TR),Cut Tape (CT)

SKU:f748b8f2e116 Category: Ferrite Beads and Chips Brand: Cal-Chip Electronics, Inc.

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

FB160808T-300Y-S-2 is listed in the Chip Ferrite Bead range at ChipApex. The manufacturer field lists Cal-Chip Electronics, Inc.. Its product description is FERRITE BEAD 30 OHM 0603 1LN. Review the specifications below when checking this part for your BOM.

Chip Ferrite Bead specifications for FB160808T-300Y-S-2

Description：FERRITE BEAD 30 OHM 0603 1LN
Series：FB
Mfr：Cal-Chip Electronics, Inc.
Package：Tape & Reel (TR),Cut Tape (CT)
Filter Type：Signal Line
Number of Lines：1
Impedance @ Frequency：30 Ohms @ 100 MHz
Current Rating (Max)：700mA
DC Resistance (DCR) (Max)：200mOhm
Ratings：-
Operating Temperature：-55°C ~ 125°C
Package / Case：0603 (1608 Metric)
Mounting Type：Surface Mount
Height (Max)：0.037" (0.95mm)
Size / Dimension：0.063" L x 0.031" W (1.60mm x 0.80mm)
Features：-

Chip Ferrite Bead datasheet and documents for FB160808T-300Y-S-2

FB160808T-300Y-S-2

Chip Ferrite Bead Overview

The FB160808T-300Y-S-2 is a multilayer ferrite chip EMI suppressor manufactured by Cal-Chip Electronics, Inc. It operates in the 0603 (1608 metric) surface mount package with dimensions of 1.6 mm length and 0.8 mm height. The component provides an impedance of 30 Ohms at 100 MHz and supports a maximum current rating of 700 mA. Its maximum DC resistance is specified as 200 milliohms. Designed for signal line filtering, it utilizes magnetic material and multilayered technology to attenuate electromagnetic interference without requiring additional wiring.

Chip Ferrite Bead Feature Summary

Provides EMI/RFI attenuation through multilayer ferrite technology
Designed for direct surface mounting on PCBs without wiring requirements
Offers high electrode strength and solder heat resistance
Compatible with flow, reflow, and wave soldering processes

Chip Ferrite Bead Applications

Power supply circuits
Battery charger systems
Portable electronic devices
Energy-efficient system designs

Chip Ferrite Bead Procurement Notes

Verify the specific impedance value of 30 Ohms at 100 MHz against your circuit requirements. Confirm the 700 mA current rating is sufficient for your application's peak loads. Ensure the 0603 package footprint matches your PCB layout. Check RoHS compliance status if required by your manufacturing standards. Validate the 200 milliohm DC resistance limit to prevent excessive voltage drop.

Chip Ferrite Bead Selection Notes

Select this component when space constraints require a 0603 surface mount form factor. Choose this part for applications needing moderate impedance suppression at 100 MHz. Consider the 700 mA current handling capability for power lines or signal paths. Evaluate the low DC resistance to minimize insertion loss in sensitive circuits. Ensure compatibility with standard SMT assembly processes.

Chip Ferrite Bead Part Context

This ferrite chip belongs to the FB series of multilayer EMI suppressors from Cal-Chip Electronics. These components are engineered to replace conventional wire-wound beads, simplifying assembly by allowing direct PCB mounting. The series emphasizes high impedance performance and robust mechanical properties suitable for automated surface mounting equipment.