FB160808T-310Y-S

Chip Ferrite Bead Overview

The FB160808T-310Y-S is a surface-mount ferrite chip bead manufactured by Cal-Chip Electronics. It operates as a single-function EMI suppressor with an impedance of 31 Ohms at 100 MHz. The component supports a maximum current rating of 400 mA and features a low DC resistance of 100 mOhm. Housed in a standard 0603 (1608 metric) package, it measures 1.6 mm in length, 0.8 mm in height, and utilizes multilayer ferrite technology for effective noise attenuation.

Chip Ferrite Bead Feature Summary

• Multilayer ferrite construction provides high electrode strength and solder heat resistance
• Designed for direct PCB mounting to eliminate EMI/RFI without additional wiring
• Optimized for flow, reflow, and wave soldering processes required for surface mount applications

Chip Ferrite Bead Applications

• Signal line filtering in electronic equipment
• EMI suppression for surface-mounted circuit boards
• Noise attenuation in compact consumer electronics

Chip Ferrite Bead Procurement Notes

Verify the specific impedance value and current rating against the manufacturer's official datasheet before integration. Confirm RoHS compliance status and lead times directly with authorized distributors. Ensure the 0603 footprint matches the target PCB design constraints. Cross-reference part numbers to avoid confusion with similar series variants that may have different electrical characteristics.

Chip Ferrite Bead Selection Notes

Select this component when a 31 Ohm impedance at 100 MHz is required for signal lines. The 400 mA current rating suits low-power applications where minimal DC resistance is critical. The 0603 package allows for dense board layouts. Consider higher current variants if operational loads exceed specified limits or if lower insertion loss is needed.

Chip Ferrite Bead Part Context

This ferrite bead belongs to the FB series from Cal-Chip Electronics, designed for multilayer EMI suppression. The series utilizes specialized magnetic materials to offer high impedance in small form factors. These components are engineered to replace conventional wire-wound beads, simplifying assembly while maintaining effective noise reduction capabilities in modern surface-mount electronics.

Chip Ferrite Bead Replacement Considerations

The FB160808T-300Y-S-1 is a confirmed substitute offering enhanced performance with a 600 mA current rating and reduced DC resistance of 80 mOhm. Verify compatibility regarding impedance curves and physical dimensions before substitution.