FB322513T-600Y-S-1

Chip Ferrite Bead Overview

The FB322513T-600Y-S-1 is a single-function ferrite chip bead manufactured by Cal-Chip Electronics, Inc. It features a 1210 (3225 Metric) surface-mount package with two pins. The component exhibits an impedance of 60 ohms at 100 MHz and a maximum DC resistance of 0.3 ohms. It supports a current rating of 0.4 A to 0.5 A depending on the specific datasheet reference. The device is RoHS compliant and lead-free, designed for signal line filtering applications in electronic circuits.

Chip Ferrite Bead Feature Summary

• Provides electromagnetic interference suppression for single signal lines
• Offers high impedance characteristics at 100 MHz for noise attenuation
• Designed for surface-mount assembly using standard reflow or wave soldering processes

Chip Ferrite Bead Applications

• Signal line filtering in general-purpose electronic equipment
• Noise suppression in data transmission interfaces
• EMI reduction in compact consumer electronics assemblies

Chip Ferrite Bead Procurement Notes

Verify the exact current rating and impedance tolerance against the manufacturer's official datasheet before procurement, as sources indicate variations between 0.4A and 0.5A ratings. Confirm that the 1210 footprint matches your PCB design constraints. Ensure compliance with RoHS directives if required by your manufacturing standards. Cross-reference the suffix 'S-1' to confirm packaging and specific electrical tolerances match your project requirements.

Chip Ferrite Bead Selection Notes

Select this component when space-constrained designs require a 1210 footprint ferrite bead for signal integrity management. The 60-ohm impedance at 100 MHz makes it suitable for mid-frequency noise suppression. Consider the low DC resistance of 0.3 ohms to minimize voltage drop in sensitive signal paths. Evaluate the current handling capability relative to the operating conditions of the target circuit to ensure reliable performance without saturation.

Chip Ferrite Bead Part Context

This part belongs to the FB series of multilayer ferrite chip beads from Cal-Chip Electronics. These components are engineered for high reliability in surface-mount applications. The series utilizes advanced ceramic materials to achieve stable frequency-dependent impedance characteristics. They are widely used in modern electronics where small form factors and effective EMI control are critical for system stability and regulatory compliance.

Chip Ferrite Bead Replacement Considerations

Publicly confirmed substitute part numbers were not identified in the provided source material. Verify compatibility with alternative ferrite beads based on matching impedance curves, current ratings, and physical dimensions before substitution.