FB451616T-600Y-S

Chip Ferrite Bead Overview

The FB451616T-600Y-S is a single-line ferrite bead manufactured by Cal-Chip Electronics, Inc. It features an 1806 (4516 metric) surface-mount package with dimensions of 4.5mm length and 1.6mm width. The component provides an impedance of 60 Ohms at 100 MHz. It has a maximum DC resistance of 200 milliohms and supports a current rating of 500mA. The device operates within a temperature range of -55°C to +125°C and complies with RoHS3 standards.

Chip Ferrite Bead Feature Summary

• Provides signal line filtering with 60 Ohm impedance at 100 MHz
• Low DC resistance of 200 milliohms for minimal power loss
• Compact 1806 surface-mount footprint for space-constrained designs

Chip Ferrite Bead Applications

• Signal line noise suppression in electronic circuits
• EMI filtering for high-speed data lines
• Power integrity management in compact devices

Chip Ferrite Bead Procurement Notes

Verify the specific impedance value of 60 Ohms at 100 MHz against circuit requirements. Confirm the 500mA current rating is sufficient for the application's peak load. Ensure the 1806 package size fits the PCB layout constraints. Check RoHS3 compliance status if required by regional regulations.

Chip Ferrite Bead Selection Notes

Select this component when a low-profile ferrite bead is needed for signal integrity. The 200 milliohm DC resistance minimizes voltage drop across the line. The 1806 case size offers a balance between thermal performance and board space. Consider the 500mA limit for continuous current applications.

Chip Ferrite Bead Part Context

This ferrite bead belongs to the passive components category, specifically designed for electromagnetic interference suppression. It complements other filtering solutions like capacitors and inductors. The 1806 package is common in consumer electronics and industrial equipment where space is limited.

Chip Ferrite Bead Replacement Considerations

Public confirmed substitute part numbers are not available in the provided documentation.