FBH160808T-601Y-S-H

Chip Ferrite Bead Overview

The FBH160808T-601Y-S-H is a single-function surface-mount ferrite chip bead manufactured by Cal-Chip Electronics. It operates within a frequency range of 100 MHz and provides an output impedance of 600 Ohms at this frequency. The component supports a maximum current rating of 2 A with a maximum DC resistance of 100 mΩ. It utilizes a multilayered ferrite construction in a 0603 (1608 metric) package, measuring 1.6 mm in length, 0.8 mm in height, and 0.8 mm in width. The device is RoHS compliant and lead-free.

Chip Ferrite Bead Feature Summary

• Provides EMI/RFI attenuation through high impedance characteristics without requiring additional wiring
• Multilayered construction ensures strong electrode integrity and solder heat resistance
• Optimized for surface mounting applications compatible with flow, reflow, and wave soldering processes

Chip Ferrite Bead Applications

• EMI suppression in electronic equipment circuits
• Signal line filtering for high-frequency noise reduction
• Power line filtering in compact surface-mount designs

Chip Ferrite Bead Procurement Notes

Verify the specific impedance tolerance and current rating requirements against the official datasheet before procurement. Confirm that the 0603 package dimensions align with the target PCB footprint. Ensure compliance with RoHS and lead-free standards if required by the end application. Check for any specific handling or storage conditions mandated by the manufacturer to maintain component integrity during assembly.

Chip Ferrite Bead Selection Notes

Select this component when a 600 Ohm impedance at 100 MHz is required for EMI suppression in space-constrained designs. The 2 A current rating makes it suitable for power lines where moderate current handling is necessary. The 0603 package allows for high-density board layouts. Consider the low DC resistance of 100 mΩ to minimize voltage drop and power loss in the circuit path compared to higher resistance alternatives.

Chip Ferrite Bead Part Context

This part belongs to the FBH series of multilayer ferrite chip beads from Cal-Chip Electronics. These components are designed to replace conventional wire-wound beads, offering easier integration into automated surface-mount production lines. The series emphasizes reliability under thermal stress and mechanical robustness, catering to modern electronics manufacturing demands for compact and efficient passive components.

Chip Ferrite Bead Replacement Considerations

Direct substitutes must match the 600 Ohm impedance at 100 MHz, 2 A current rating, and 0603 package size. Verify equivalent DC resistance and temperature stability ranges. Cross-reference with other manufacturers' 0603 ferrite beads ensuring identical electrical performance and physical dimensions to ensure seamless replacement without PCB redesign.