FC28B1729

Overview

The FC28B1729 is a hinged, free-hanging ferrite core manufactured by Leader Tech Inc. It utilizes Material 28 to provide electromagnetic interference suppression. The component exhibits an impedance of 200 Ohms at 100MHz. Its inner dimensions are 1.354 inches wide by 0.059 inches high (34.40mm x 1.50mm). The outer dimensions measure 2.429 inches wide by 0.799 inches high (61.70mm x 20.30mm).

Feature Summary

• Hinged snap-on design for secure cable retention.
• Free-hanging installation method.
• Material 28 composition for specific frequency attenuation.

Applications

• Cable shielding for electronic equipment.
• Electromagnetic interference suppression on wiring harnesses.
• Signal integrity enhancement in data transmission lines.

Procurement Notes

Verify the exact material grade and impedance curve against official Leader Tech datasheets before integration. Confirm that the inner diameter accommodates the target cable bundle without excessive force. Ensure compliance with relevant environmental regulations such as RoHS if required by the end application specifications.

Selection Notes

Select this component when a snap-on ferrite core is required for cables up to 0.059 inches thick. The 200 Ohm impedance at 100MHz suits applications targeting noise reduction in that frequency range. Consider the physical size constraints of the enclosure to ensure the free-hanging unit does not interfere with adjacent components.

Part Context

This part belongs to the FerriShield series of cable ferrites from Leader Tech Inc. These components are designed to suppress common-mode noise on cables entering or exiting shielded enclosures. The hinged construction allows for easy installation on existing cabling without disconnecting connectors.

Replacement Considerations

Check Leader Tech documentation for direct substitutes within the same material family. Verify that any alternative part matches the 200 Ohm @ 100MHz impedance profile and fits the 34.40mm inner width constraint.