FCR16.0M2GT

Resonators Overview

The FCR16.0M2GT is a ceramic resonator manufactured by TDK Corporation, designed for through-hole mounting applications. It operates at a nominal frequency of 16 MHz with a frequency stability of ±0.3% and a frequency tolerance of ±0.5%. The component features an internal impedance of 100 Ohms and functions within a temperature range of -40°C to +85°C. Physically, it utilizes a radial package with two leads spaced at a 5.00mm pitch, measuring 9.00mm in length and 4.00mm in width. This device provides precise timing solutions for electronic circuits requiring stable oscillation frequencies.

Resonators Feature Summary

• Utilizes ceramic material technology for reliable oscillation performance
• Designed for standard through-hole PCB mounting processes
• Incorporates integrated impedance characteristics for circuit compatibility

Resonators Applications

• Microcontroller clock signal generation
• General-purpose oscillator circuits
• Timing reference for digital logic systems

Resonators Procurement Notes

Verify the specific ordering suffix to ensure correct packaging configuration, as variations may exist between tape-and-reel and bulk formats. Confirm that the required frequency tolerance and stability specifications align with the target application's design constraints before finalizing procurement decisions. Ensure compatibility with existing board layout dimensions regarding lead pitch and component height clearance.

Resonators Selection Notes

Select this component when a cost-effective, high-stability timing source is required for through-hole designs. Consider the 100 Ohm internal impedance when designing matching networks or load conditions. Evaluate the operating temperature range against environmental requirements to ensure reliability under thermal stress. Compare physical dimensions against available PCB real estate to confirm mechanical fitment.

Resonators Part Context

This part belongs to TDK's FCR series of ceramic resonators, which are widely used in consumer electronics and industrial equipment. Ceramic resonators offer a balance between performance and cost compared to quartz crystals, making them suitable for applications where extreme precision is not critical but consistent timing is necessary. The radial leaded format supports automated insertion or manual assembly workflows.

Resonators Replacement Considerations

Direct substitutes must match the 16 MHz frequency, ±0.3% stability, and 100 Ohm impedance. Verify that alternative components support the same -40°C to +85°C operating range and radial 5.00mm pitch package. Cross-reference manufacturer datasheets to ensure pinout and electrical characteristics are identical to prevent circuit malfunction.