FN2010-12-06

Overview

The Schaffner FN2010-12-06 is a single-phase EMI/EMC power line filter designed for chassis mounting. It features quick-connect terminals and supports a voltage rating of 230 to 250 VAC with a current rating of 12.0 to 13.8 A. The component operates within a frequency range of 0 Hz to 400 Hz. Key electrical parameters include a leakage current between 0.38 mA and 0.66 mA, ensuring compliance with safety standards for low leakage.

Feature Summary

• Single-stage filtering architecture for effective noise suppression
• Quick-connect terminal configuration for simplified circuit integration
• Chassis mount design for secure mechanical installation

Applications

• General purpose electronic equipment requiring EMI suppression
• Power supply input stages in industrial machinery
• Medical devices adhering to strict leakage current limits

Procurement Notes

Verify the specific current and leakage current ratings against the official datasheet, as values may vary slightly based on test conditions. Confirm that the quick-connect terminal dimensions match the target PCB or wire harness specifications. Ensure the chassis mounting hole pattern aligns with the enclosure design before finalizing procurement.

Selection Notes

Select this model when a single-phase solution is required for frequencies up to 400 Hz. The quick-connect interface is suitable for applications where frequent maintenance or modular assembly is necessary. Consider the thermal performance and ambient temperature constraints, as the filter's efficiency depends on proper heat dissipation through the chassis mount.

Part Context

This component belongs to the FN2010 series from Schaffner EMC Inc., which specializes in single-phase EMI filters. The series is engineered for general-purpose applications, offering a balance between attenuation performance and physical footprint. The FN2010-12-06 variant specifically targets moderate current requirements within the standard mains frequency spectrum.

Replacement Considerations

Direct substitutes must match the 12A current rating, 250VAC voltage, and quick-connect terminal style. Verify that alternative models maintain similar leakage current characteristics if used in sensitive medical or precision instrumentation applications.