FOD8160R2V

Logic Output Optoisolators Overview

The FOD8160R2V is a high-speed logic output optoisolator from onsemi, designed for robust signal transmission across isolated boundaries. It features a single channel with an open-collector Schottky-clamped output, supporting data rates up to 10Mbps. The device provides 5000Vrms isolation voltage and a minimum common-mode transient immunity of 20kV/µs. Operating temperatures range from -40°C to 100°C, with supply voltages between 3V and 5.5V. Key timing parameters include maximum propagation delays of 90ns (tpLH) and 80ns (tpHL), and typical rise/fall times of 22ns and 9ns respectively.

Logic Output Optoisolators Feature Summary

• High-speed operation with 10Mbps data rate capability
• Enhanced noise immunity via 20kV/µs common-mode transient rejection
• Integrated Schottky clamping on the open-collector output for fast switching
• Wide operating temperature range suitable for industrial environments

Logic Output Optoisolators Applications

• Industrial automation control systems
• Power supply feedback loops
• Communication interface isolation
• Ground loop noise elimination in measurement equipment

Logic Output Optoisolators Procurement Notes

Verify the specific suffix R2V corresponds to tape and reel packaging when ordering. Confirm that the 5-SOP package matches the footprint requirements of the target PCB design. Ensure that the 5000Vrms isolation rating meets the safety standards required by the end application. Check RoHS compliance status if environmental regulations apply to the manufacturing process.

Logic Output Optoisolators Selection Notes

Select this component when high-speed digital isolation is required alongside strong noise immunity. The open-collector output allows for flexible voltage level translation between different logic families. Consider the 20kV/µs CMTI specification for applications involving rapid switching transients or noisy power environments where standard optocouplers might fail.

Logic Output Optoisolators Part Context

This part belongs to the FOD8160 series of high-speed optocouplers. It shares functional similarities with other members like the FOD8163 but differs in package configuration and specific electrical characteristics. The R2V suffix indicates a specific packaging variant optimized for automated surface-mount assembly processes.

Logic Output Optoisolators Replacement Considerations

Publicly confirmed substitute part numbers are not available in the provided documentation. Cross-referencing should be performed using key parameters such as isolation voltage, data rate, and package type.