FOD817B300

$0.43

Description：OPTOISOLATOR 5KV 1CH TRANS 4-DIP
Series：-
Mfr：onsemi
Package：Tube

SKU:83b626a36e9a Category: Transistor, Photovoltaic Output Optoisolators Brand: onsemi

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

Product Detailed Parameters

Description：OPTOISOLATOR 5KV 1CH TRANS 4-DIP
Series：-
Mfr：onsemi
Package：Tube
Number of Channels：1
Voltage - Isolation：5000Vrms
Current Transfer Ratio (Min)：130% @ 5mA
Current Transfer Ratio (Max)：260% @ 5mA
Turn On / Turn Off Time (Typ)：-
Rise / Fall Time (Typ)：4µs, 3µs
Input Type：DC
Output Type：Transistor
Voltage - Output (Max)：70V
Current - Output / Channel：50mA
Voltage - Forward (Vf) (Typ)：1.2V
Current - DC Forward (If) (Max)：50 mA
Vce Saturation (Max)：200mV
Operating Temperature：-55°C ~ 110°C
Mounting Type：Through Hole
Package / Case：4-DIP (0.300", 7.62mm)
Supplier Device Package：4-DIP
Grade：-
Qualification：-

Download product information

FOD817B300

Overview

The FOD817B300 is a single-channel phototransistor output optocoupler from onsemi, housed in a 4-pin PDIP package. It features a maximum collector-emitter voltage of 70V and a peak forward input current of 50mA. The device provides an isolation voltage of 5000Vrms with a typical rise and fall time of 18μs. The current transfer ratio ranges from 130% to 260%. Operating temperatures span from -55°C to +110°C, with a power dissipation rating of 200mW.

Feature Summary

Provides high-voltage electrical isolation between input and output circuits
Utilizes a standard four-pin through-hole DIP package for easy integration
Delivers fast switching performance suitable for general signal transmission

Applications

General-purpose signal isolation in industrial control systems
Interface circuits for logic-to-power level translation
Switching applications requiring galvanic isolation

Procurement Notes

Verify the specific suffix B300 against official datasheets to confirm it denotes the tube packaging format rather than a functional variant. Ensure the procurement specification matches the required CTR bin (130-260%) and that the 5000Vrms isolation rating meets the safety standards of the target application environment.

Selection Notes

Select this component when a standard NPN phototransistor output is required for cost-effective isolation. Consider the 18μs switching speed limitations compared to high-speed alternatives. Verify that the 70V collector-emitter voltage and 50mA collector current limits accommodate the load requirements without exceeding the 200mW power dissipation threshold at elevated temperatures.

Part Context

This part belongs to the FOD817 series, a widely recognized family of transistor-output optocouplers. The FOD817B300 specifically represents the B-grade current transfer ratio variant packaged in tubes. It serves as a direct replacement for legacy Fairchild Semiconductor parts within the same product lineage, maintaining pinout and electrical compatibility.