FP12050S27DC2X

Diode Arrays Overview

The FP12050S27DC2X is a full silicon carbide power module featuring dual paralleled Metal-Pillar Schottky (MPS) diodes in an SOT-227 package. It provides a DC blocking voltage of 1200V and a nominal forward current of 50A per leg. Key electrical parameters include a total capacitive charge of 155 nC and capacitance stored energy of 44 μJ at 800V reverse bias. The device operates within a junction temperature range of -55°C to 175°C.

Diode Arrays Feature Summary

• Dual paralleled MPS diode configuration for increased parallel device convenience
• Ultra-low switching loss with zero forward and reverse recovery characteristics
• Temperature independent switching behavior allowing high frequency operation
• Optimized for high power density applications

Diode Arrays Applications

• Switching Mode Power Supply
• Power Factor Correction (PFC)
• Uninterruptible Power Supply (UPS)
• Motor Drives
• Flywheel diode in Power Inverters
• Solar/Wind Renewable Energy

Diode Arrays Procurement Notes

Verify the latest datasheet revision status, as this document is marked tentative. Confirm thermal impedance and power dissipation values which are listed as TBD in the source material. Ensure compliance with RoHS and halogen-free requirements. Contact manufacturer sales representatives for final selection confirmation and updated specifications before placing orders.

Diode Arrays Selection Notes

Select this component for high-speed and high-power density circuits requiring low capacitive charge. The dual paralleled structure simplifies layout for higher current handling. Verify that the application does not involve medical, aerospace, or traffic control systems, as these uses are explicitly excluded by the manufacturer's disclaimer.

Diode Arrays Part Context

This part belongs to the Fast SiC Semiconductor Inc. portfolio of silicon carbide power modules. It utilizes Silicon Carbide technology to achieve superior performance compared to traditional silicon devices. The SOT-227 packaging facilitates mounting on standard heat sinks using M4 screws with a recommended torque of 1.3 Nm.

Diode Arrays Replacement Considerations

Consult the manufacturer directly for comparable products. No specific substitute part numbers are documented in the provided datasheet.

Diode Arrays FAQ

What is the maximum non-repetitive peak forward surge current?

The maximum non-repetitive peak forward surge current is 6kA for a pulse width of 10μs at a case temperature of 25°C.

Does the device exhibit reverse recovery charge?

No, the datasheet specifies zero reverse recovery characteristics for this silicon carbide MPS diode module.

What is the isolation test voltage requirement?

The isolation test voltage must exceed 2.5 kV AC at 50Hz RMS for one minute.