FS-3007

Overview

The Digi FS-3007 is a ConnectCore 9P system-on-module featuring a Samsung S3C2440 ARM920T processor operating at 400 MHz. It provides up to 512 MB of SDRAM and 2 GB of NAND Flash memory without integrated Ethernet connectivity. The module supports low-power operation, drawing 26 mA at 3.3V during normal use and 2.6 mA in idle mode. Key peripherals include an LCD controller for TFT/STN displays, USB 1.1 host/device support, three RS-232 interfaces, and SD/SDIO card slots.

Feature Summary

• Samsung S3C2440 ARM920T processor running at 400 MHz
• Up to 512 MB SDRAM and 2 GB NAND Flash onboard
• Integrated LCD controller supporting VGA resolution (640x480) with up to 24bpp color depth
• USB 1.1 host and device capabilities with full and low-speed modes

Applications

• Mobile and battery-operated devices requiring low power consumption
• Embedded systems with user interface requirements utilizing TFT or STN LCDs
• Remote locations lacking readily available power sources
• Industrial applications needing multiple serial communication interfaces

Procurement Notes

Verify the specific hardware revision and component population against the official datasheet before procurement. Confirm that the absence of on-board Ethernet MAC/PHY aligns with the project's network connectivity requirements. Ensure development kits are selected separately if software platform support is needed.

Selection Notes

Select this model when high-performance ARM9 processing is required without integrated networking. Consider alternative part numbers like FS-372 if 10 Mbps Ethernet connectivity is necessary. Evaluate the 3.3V power supply constraints, as the module draws up to 180 mA under maximum load conditions.

Part Context

FS-3007 belongs to the ConnectCore 9P series, which shares the same physical form factor and core processor architecture as other variants in the family. It differs from models such as FS-372 primarily by the omission of the optional Cirrus Logic CS8900A Ethernet controller, offering a design focused on processing and peripheral I/O rather than built-in networking.

Replacement Considerations

Public confirmed substitute part numbers only; omit otherwise.