FSAM30SH60A

Power Driver Modules Overview

The FSAM30SH60A is a Motion SPM® 2 Series intelligent power module designed for three-phase AC induction, BLDC, and PMSM motor control. It integrates a 600V/30A IGBT inverter with optimized gate drivers and protection circuits. Key electrical parameters include a collector-emitter saturation voltage of 2.5V at 30A (25°C), a maximum DC-link supply voltage of 400V, and an isolation rating of 2500 Vrms. The module operates with a single grounded power supply and supports logic-level inputs compatible with 3.3V or 5V systems.

Power Driver Modules Feature Summary

• Integrates a 600V/30A three-phase IGBT inverter with high-speed HVIC gate drivers to minimize EMI and switching losses.
• Includes comprehensive on-module protection features such as under-voltage lockouts, short-circuit shutdown, and thermal monitoring via a built-in NTC thermistor.
• Features separate open-emitter pins for low-side IGBTs to enable precise three-phase current sensing for advanced control algorithms.

Power Driver Modules Applications

• Motion control systems for home appliances
• Industrial motor drives
• AC Induction, BLDC, and PMSM motor inverters

Power Driver Modules Procurement Notes

Verify the component status as End-of-Life (EOL) before design finalization. Confirm that the package marking and ordering information align with ON Semiconductor's updated nomenclature following the Fairchild integration, specifically noting the transition from underscores to dashes in part numbers. Ensure compliance with RoHS standards and verify the specific revision level against the latest datasheet.

Power Driver Modules Selection Notes

Select this module for applications requiring integrated drive and protection in a compact SPM32-AA package. It is suitable for designs operating up to 15 kHz switching frequency. Ensure the application can accommodate the required bias voltages (13.5V to 16.5V for VCC) and that the thermal management system maintains the case temperature within the specified -20°C to 100°C range.

Power Driver Modules Part Context

The FSAM30SH60A belongs to the Motion SPM® 2 Series, originally developed by Fairchild Semiconductor and now managed by ON Semiconductor. This series is engineered to provide a complete inverter stage solution, reducing board space and complexity by combining power devices with control ICs. It represents a transition point in product lineage where Fairchild part numbers were adapted to ON Semiconductor's system requirements.

Power Driver Modules Replacement Considerations

Public confirmed substitute part numbers are not available in the provided documentation. As the device is listed as End-of-Life, alternative solutions must be sourced through general industry channels or by consulting ON Semiconductor for current portfolio equivalents.

Power Driver Modules FAQ

How is the short-circuit protection level adjusted?

The adjustable current protection level is set by selecting the external sense resistor (Rs) connected to the Sense-IGBT emitter. The internal circuit detects the voltage across this resistor to trigger shutdown if the threshold is exceeded.

What is the function of the separate open-emitter pins?

The separate negative IGBT terminals (NU, NV, NW) for each phase allow for independent current sensing. This supports a wider variety of control algorithms by providing direct access to the phase currents without relying solely on shunt resistors in the main DC link.

Can the module be driven directly by a microcontroller?

Yes, the module features an active-LOW interface that works directly with 3.3V or 5V logic levels. The built-in high-speed HVIC translates these logic inputs to the high-voltage signals required for the IGBTs, eliminating the need for external optocouplers.