SEARCH
— IC芯片 | 连接器 | 传感器 | 被动器件 —
The FT24C04A-ESR-T is a 4K-bit (512 x 8) serial EEPROM from Fremont Micro Devices Ltd. It features an I2C-compatible two-wire interface with clock frequencies up to 1 MHz at 5V and 400 kHz at lower voltages. Operating on a single supply voltage of 1.8V to 5.5V, it supports 16-byte page writes and includes hardware write protection via the WP pin. The device operates within an industrial temperature range of -40°C to +85°C.
Verify that the specific suffix 'ESR' corresponds to the required package type and tape-and-reel packaging configuration as defined in the manufacturer's ordering code table. Confirm RoHS compliance status and check for any recent Product Change Notifications (PCN) regarding lead finish or material composition updates before finalizing procurement.
Select this component when a 4K-bit capacity is required alongside a compact footprint and robust noise immunity. Ensure the design accommodates the 1.8V minimum operating voltage if used in low-power scenarios. Verify that the system bus speed does not exceed the specified limits for the chosen supply voltage level.
This part belongs to the FT24C04A/08A/16A series of serial EEPROMs manufactured by Fremont Micro Devices Ltd. The series utilizes advanced CMOS technology to achieve low power consumption while maintaining high reliability and endurance characteristics suitable for demanding electronic applications.
FT24C04A-UNR-T: Functionally equivalent alternative available from Fremont Micro Devices Ltd.
Up to four FT24C04A devices can be wired-OR on the same bus using the A2 and A1 address pins.
The self-timed write cycle has a maximum duration of 5 milliseconds.