Memory IC GD25D05CTIGR product image

GD25D05CTIGR

$0.24
  • Description:IC FLASH 512KBIT SPI/DUAL 8SOP
  • Series:-
  • Mfr:GigaDevice Semiconductor (HK) Limited
  • Package:Tape & Reel (TR),Cut Tape (CT)

SKU:10a0a46d7328 Category: Brand:

  
  • Quantity
    • -
    • +
  •    
ChipApex WhatsApp

Consult the customer manager about the wholesale price.

consultation hotline:86-132-6715-2157

email:[email protected]
Contact the product manager for consultation. One-stop consultation is available.


Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Submitting!
Submission successful!
Submission failed!
Email error!
Phone number error!

GD25D05CTIGR is listed in the Memory IC range at ChipApex. The manufacturer field lists GigaDevice Semiconductor (HK) Limited. Its product description is IC FLASH 512KBIT SPI/DUAL 8SOP. Review the specifications below when checking this part for your BOM.

Memory IC specifications for GD25D05CTIGR

  • Description:IC FLASH 512KBIT SPI/DUAL 8SOP
  • Series:-
  • Mfr:GigaDevice Semiconductor (HK) Limited
  • Package:Tape & Reel (TR),Cut Tape (CT)
  • Memory Type:Non-Volatile
  • Memory Format:FLASH
  • Technology:FLASH - NOR
  • Memory Size:512Kbit
  • Memory Organization:64K x 8
  • Memory Interface:SPI - Dual I/O
  • Clock Frequency:100 MHz
  • Write Cycle Time - Word, Page:50µs, 4ms
  • Voltage - Supply:2.7V ~ 3.6V
  • Operating Temperature:-40°C ~ 85°C (TA)
  • Mounting Type:Surface Mount
  • Package / Case:8-SOIC (0.154", 3.90mm Width)
  • Supplier Device Package:8-SOP
  • Access Time:-
  • Grade:-
  • Qualification:-

Memory IC datasheet and documents for GD25D05CTIGR

GD25D05CTIGR

Memory IC Overview

The GD25D05CTIGR is a 512K-bit Serial NOR Flash memory manufactured by GigaDevice. It features a uniform sector architecture with 4K-byte sectors and 32/64K-byte blocks. The device supports Standard SPI and Dual Output interfaces, operating at clock frequencies up to 100 MHz. It requires a single power supply voltage ranging from 2.7V to 3.6V. The memory organization consists of 64K x 8 bits. It includes hardware and software write protection mechanisms and offers data retention of 20 years.

Memory IC Feature Summary

  • Supports Standard SPI and Dual Output data transfer modes for flexible interface compatibility.
  • Features uniform sector architecture allowing efficient block and sector-level erasing operations.
  • Provides comprehensive data protection through software configuration and hardware WP# pin control.
  • Includes advanced security features such as a unique 128-bit identifier for device authentication.

Memory IC Applications

  • Code storage in embedded systems requiring fast read access
  • Data logging applications needing reliable non-volatile storage
  • Firmware storage for microcontroller-based devices

Memory IC Procurement Notes

Verify the specific package variant (SOP8 150mil) against the design schematic. Confirm that the 2.7V to 3.6V supply range matches the system voltage rails. Ensure ESD handling procedures are followed during assembly due to moisture sensitivity. Check for RoHS compliance documentation if required by regional regulations.

Memory IC Selection Notes

Select this component when a small capacity NOR flash with dual I/O support is needed. It is suitable for designs where code execution speed is critical but density requirements are low. Consider the SOP8 package constraints for PCB layout. Verify that the 100 MHz clock frequency meets the system bus timing requirements.

Memory IC Part Context

This part belongs to the GD25D10C/05C series, which offers 1M-bit and 512K-bit densities. The series is designed for 3.3V applications with uniform sector structures. It complements GigaDevice's broader portfolio of SPI NOR flashes targeting consumer and industrial electronics markets.

Memory IC Replacement Considerations

GD25D10CTIGR offers higher density within the same series. GD25WD05CTIGR provides a wider voltage range but may differ in electrical characteristics. Cross-reference datasheets for pin compatibility and command set alignment before substitution.

GD25D05CTIGRGD25D05CTIGR
$0.24
Buy Now