GD25Q64ESJGR

$0.76

Description：IC FLASH 64MBIT SPI/QUAD 8SOP
Series：GD25Q
Mfr：GigaDevice Semiconductor (HK) Limited
Package：Tape & Reel (TR)

SKU:17333b827f82 Category: Memory IC Brand: GigaDevice Semiconductor (HK) Limited

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

GD25Q64ESJGR is listed in the Memory IC range at ChipApex. The manufacturer field lists GigaDevice Semiconductor (HK) Limited. Its product description is IC FLASH 64MBIT SPI/QUAD 8SOP. Review the specifications below when checking this part for your BOM.

Memory IC specifications for GD25Q64ESJGR

Description：IC FLASH 64MBIT SPI/QUAD 8SOP
Series：GD25Q
Mfr：GigaDevice Semiconductor (HK) Limited
Package：Tape & Reel (TR)
Memory Type：Non-Volatile
Memory Format：FLASH
Technology：FLASH - NOR (SLC)
Memory Size：64Mbit
Memory Organization：8M x 8
Memory Interface：SPI - Quad I/O
Clock Frequency：133 MHz
Write Cycle Time - Word, Page：140µs, 4ms
Voltage - Supply：2.7V ~ 3.6V
Operating Temperature：-40°C ~ 105°C (TA)
Mounting Type：Surface Mount
Package / Case：8-SOIC (0.209", 5.30mm Width)
Supplier Device Package：8-SOP
Access Time：7 ns
Grade：-
Qualification：-

Memory IC datasheet and documents for GD25Q64ESJGR

GD25Q64ESJGR

Memory IC Overview

The GD25Q64ESJGR is a 64 Mbit (8M x 8) NOR flash memory manufactured by GigaDevice. It supports standard, dual, and quad SPI interfaces with a maximum clock frequency of 133 MHz. The device operates on a single power supply ranging from 2.7 V to 3.6 V. It features uniform sector architecture with 4 KByte sectors and 32/64 KByte blocks. Key electrical characteristics include a typical standby current of 12 μA and deep power-down current of 1 μA. The component ensures data retention for 20 years and endurance of at least 100,000 program/erase cycles.

Memory IC Feature Summary

Supports standard, dual, and quad serial peripheral interface modes for flexible data transfer speeds up to 532 Mbits/s in Quad I/O mode.
Provides comprehensive software and hardware write protection mechanisms including block protect bits and status register locking.
Features advanced security capabilities such as a 128-bit unique ID, SFDP support, and three 3x1024-byte security registers with OTP locks.

Memory IC Applications

Storing firmware and boot code for microcontrollers via Execute In Place (XiP).
System configuration storage and parameter logging in embedded devices.
Data storage for IoT modules and consumer electronics requiring high reliability.

Memory IC Procurement Notes

Verify the specific suffix 'SJGR' against the manufacturer's official ordering information table to confirm package type and tape/reel specifications. Ensure compatibility with system voltage requirements within the 2.7V to 3.6V range. Confirm moisture sensitivity level handling procedures during assembly.

Memory IC Selection Notes

Select this component for designs requiring uniform sector erase architecture and high-speed quad SPI access. Consider the SOP-8 or other available packages based on PCB space constraints. Evaluate the need for hardware write protection via the WP# pin if security against accidental writes is critical.

Memory IC Part Context

This part belongs to the GD25Q64E series of uniform sector dual and quad serial flash memories. The series is designed for applications demanding high performance and reliability. It shares core architectural features with other variants in the family, differing primarily in packaging and specific ordering suffixes defined by the manufacturer.