GMLB-160808-0100A-N2

Chip Ferrite Bead Overview

The GMLB-160808-0100A-N2 is a shielded surface-mount inductor manufactured by Pulse Electronics. It features a ceramic core and multilayer construction within a 0603 (1.6 mm x 0.8 mm x 0.8 mm) package. The component provides an inductance of 1 nH with a tolerance of 0.3 nH. It has a maximum DC resistance of 400 mOhms and a saturation current rating of 600 mA. The device operates reliably between -55°C and +125°C, with a minimum Q factor of 8 at a test frequency of 100 MHz.

Chip Ferrite Bead Feature Summary

• Shielded multilayer design for reduced electromagnetic interference
• Compact 0603 footprint suitable for high-density PCB layouts
• High self-resonant frequency capability for RF applications

Chip Ferrite Bead Applications

• RF signal filtering
• Impedance matching networks
• DC-DC converter input/output filtering

Chip Ferrite Bead Procurement Notes

Verify the exact part number against official Pulse Electronics documentation to ensure compatibility with your specific circuit requirements. Confirm that the 0603 package dimensions and termination types match your PCB land pattern. Check for any recent product change notices or end-of-life announcements directly from the manufacturer before finalizing procurement plans.

Chip Ferrite Bead Selection Notes

Select this component when a low-inductance, shielded SMD solution is required for RF circuits. Ensure the 600 mA saturation current meets your peak load demands. Verify that the 400 mOhm DCR aligns with your power loss constraints. Consider the operating temperature range if the application involves extreme environmental conditions.

Chip Ferrite Bead Part Context

This part belongs to Pulse Electronics' line of surface-mount RF inductors. These components are designed for use in wireless communication devices and other high-frequency applications where space is limited and shielding is necessary to prevent noise coupling.

Chip Ferrite Bead Replacement Considerations

Consult official substitution guides for compatible alternatives. Cross-referencing with similar 1 nH shielded inductors from other manufacturers requires careful verification of impedance curves and saturation characteristics.