GS9005BCTJE3

Video Processing Overview

The GS9005BCTJE3 is a monolithic serial digital receiver designed for SMPTE 259M signals, operating at data rates up to 400 Mb/s. It features automatic cable equalization and data/clock recovery in a 28-pin PLCC package. The device supports single +5V or -5V supplies with typical power consumption of 500 mW. Key electrical parameters include an output jitter of ±100 ps (at 270 Mb/s), equalizer gain of 36 dB at 135 MHz, and input resistance of 5 kΩ. It interfaces directly with Gennum decoders and includes a signal strength indicator.

Video Processing Feature Summary

• Performs automatic cable equalization and clock/data recovery for serial digital video signals.
• Provides selectable analog cable or direct digital inputs via internal multiplexer.
• Includes signal strength indicator output proportional to equalization applied.
• Features open-collector carrier detect output for system status monitoring.

Video Processing Applications

• Receiving 4fsc NTSC and PAL serial digital video signals.
• Processing 4:2:2 component serial digital interface streams.
• Integration with GS9000B/GS9000S decoders and GS9010A Automatic Tuning Subsystems.

Video Processing Procurement Notes

Verify the 'E3' suffix confirms Pb-free and Green compliance as specified in the ordering information table. Confirm the CTJ designation corresponds to the 28-pin PLCC package with tape-and-reel shipping. Check that the component meets the 0°C to 70°C operating temperature range requirements for your specific application environment.

Video Processing Selection Notes

Select this component for applications requiring automatic equalization of long cable runs without manual adjustment. Ensure compatibility with existing Gennum decoder ecosystems if using the Automatic Tuning Subsystem. Consider the 28-pin PLCC form factor for legacy board layouts. Note that this part is not recommended for new designs; evaluate modern alternatives for future projects.

Video Processing Part Context

The GS9005BCTJE3 belongs to the GENLINX family of serial digital receivers manufactured by Gennum Corporation. It is specifically engineered to handle standard definition and early high-definition serial digital video formats defined by SMPTE standards. The device serves as a critical front-end receiver in professional video distribution and processing systems.

Video Processing Replacement Considerations

Public confirmed substitute part numbers are not available in the provided documentation. The datasheet explicitly states the product is 'NOT RECOMMENDED FOR NEW DESIGNS'. Engineers should consult current manufacturer catalogs for updated serial digital receiver solutions compatible with newer SMPTE standards.