GTXO-04-50.00M+200C50ppm1.8V

Oscillators Overview

The GTXO-04-50.00M+200C50ppm1.8V is a standard CMOS crystal oscillator manufactured by River Eletec Corporation. It operates at a nominal frequency of 50 MHz with a frequency stability of ±50 ppm. The device requires a supply voltage of 1.8 V and draws a maximum supply current of 10 mA. It supports a standby function for power-down control. The component is housed in a 4-SMD, no lead surface-mount package and is rated for an operating temperature range of -40°C to +200°C.

Oscillators Feature Summary

• CMOS output signal generation
• Integrated standby power-down control
• High-temperature operational capability up to 200°C

Oscillators Applications

• High-reliability industrial electronics
• Automotive embedded systems
• Aerospace communication modules

Oscillators Procurement Notes

Verify the specific suffix codes against official River Eletec documentation to ensure exact electrical compatibility. Confirm that the 1.8V supply requirement aligns with target system rails. Validate the ±50 ppm stability meets application timing constraints. Ensure the high-temperature rating suits the intended environmental conditions. Request manufacturer datasheets for final design-in approval.

Oscillators Selection Notes

Select this component when a 50 MHz clock source with ±50 ppm stability is required under extreme thermal conditions. The 1.8V supply voltage dictates compatibility with low-voltage logic families. The 4-SMD package size influences PCB layout density. Consider the standby feature if power management during idle states is necessary for the system architecture.

Oscillators Part Context

This model belongs to the GTXO-04 series of surface-mount crystal oscillators from River Eletec Corporation. The series focuses on compact form factors suitable for space-constrained designs. The specific part number indicates a 50 MHz frequency variant within the broader product line of SMD oscillators.

Oscillators Replacement Considerations

Consult official cross-reference lists for direct substitutes. Verify pinout compatibility and electrical parameters before substitution. Ensure replacement parts meet the same -40°C to +200°C temperature range specification.