GZ1005D152TF

Chip Ferrite Bead Overview

The GZ1005D152TF is a single-line multilayer chip ferrite bead manufactured by Shenzhen Sunlord Electronics Co., Ltd. It features a 0402 (1005 Metric) surface-mount package with dimensions of 1.00mm x 0.50mm and a maximum height of 0.65mm. The component provides an impedance of 1.5 kΩ at 100 MHz with a tolerance of ±25%. It has a maximum DC resistance of 1.6 Ω and a rated current of 100 mA. The device operates within a temperature range of -55°C to +125°C and holds a Moisture Sensitivity Level of 1.

Chip Ferrite Bead Feature Summary

• Provides high impedance attenuation for signal lines in the 1.5 kΩ range at 100 MHz
• Utilizes a compact 0402 surface-mount footprint for dense PCB layouts
• Constructed as a multilayer ceramic chip for robust mechanical stability

Chip Ferrite Bead Applications

• Signal line filtering in consumer electronics
• Noise suppression in communication equipment
• EMI reduction in computer hardware

Chip Ferrite Bead Procurement Notes

Verify the manufacturer part number against official Sunlord documentation to ensure authenticity. Confirm that the specific suffix matches the required impedance and current ratings. Check for RoHS compliance status if environmental regulations apply to the final assembly. Ensure storage conditions respect the MSL 1 rating to prevent moisture damage during soldering processes.

Chip Ferrite Bead Selection Notes

Select this component when a high-impedance ferrite bead is required for noise suppression in space-constrained designs. The 100 mA current rating limits suitability to low-power signal lines rather than power rails. Compare the 1.6 Ω DCR against circuit loss requirements. Ensure the 0402 package size aligns with the available PCB land pattern and manufacturing capabilities.

Chip Ferrite Bead Part Context

This component belongs to the GZ series of multilayer chip ferrite beads from Sunlord. The series is designed for general-purpose EMI suppression in electronic circuits. The GZ1005D152TF specifically targets applications requiring significant attenuation at 100 MHz within a small form factor, serving as a passive filter element in signal paths.

Chip Ferrite Bead Replacement Considerations

Publicly confirmed substitute part numbers are not available in the provided source material.