GZ1005D301TF

Chip Ferrite Bead Overview

The GZ1005D301TF is a multi-layer chip ferrite bead manufactured by Shenzhen Sunlord Electronics Co., Ltd. It features a 0402 (1005 Metric) surface-mount package with dimensions of 1.00mm x 0.50mm and a maximum height of 0.65mm. The component provides an impedance of 300 Ohms at 100 MHz with a tolerance of ±25%. It has a maximum DC resistance (DCR) of 500 milliohms and a rated current of 100mA. Operating within a temperature range of -55°C to +125°C, it is classified as a signal line filter suitable for consumer applications.

Chip Ferrite Bead Feature Summary

• Provides high-frequency noise suppression through significant impedance at 100 MHz
• Designed for compact surface-mount assembly in space-constrained circuits
• Capable of handling specific current loads while maintaining low DC resistance

Chip Ferrite Bead Applications

• Signal line filtering in consumer electronics
• Noise suppression in portable devices
• High-frequency circuit protection

Chip Ferrite Bead Procurement Notes

Verify the manufacturer part number against official Sunlord documentation to ensure authenticity. Confirm that the received components match the specified 0402 package dimensions and electrical characteristics. Check for RoHS compliance status if required by your manufacturing standards. Ensure storage conditions adhere to moisture sensitivity level guidelines to prevent damage before reflow soldering.

Chip Ferrite Bead Selection Notes

Select this component when a 300 Ohm impedance at 100 MHz is required for signal integrity. Ensure the circuit current does not exceed the 100mA rating to avoid performance degradation. Consider the 0402 footprint availability on the PCB layout. Verify that the operating temperature range meets the environmental requirements of the final application.

Chip Ferrite Bead Part Context

This ferrite bead belongs to the GZ series from Shenzhen Sunlord Electronics Co., Ltd., which focuses on multi-layer chip ferrite beads for various electronic applications. The series is designed to meet the demands of modern electronics for effective electromagnetic interference suppression in compact form factors.

Chip Ferrite Bead Replacement Considerations

Publicly confirmed substitute part numbers are not available in the provided source material.