GZ1005U100CTF

Chip Ferrite Bead Overview

The GZ1005U100CTF is a single-line ferrite bead manufactured by Shenzhen Sunlord Electronics Co., Ltd. It features a 0402 (1005 metric) surface-mount package with dimensions of 1.00mm length, 0.50mm width, and a maximum height of 0.65mm. The component provides an impedance of 7.5 Ohms at 100 MHz and supports a rated current of 1A. Its maximum DC resistance is 30 milliohms. It operates within a temperature range of -55°C to +125°C and complies with RoHS3 standards.

Chip Ferrite Bead Feature Summary

• Provides high-frequency noise suppression for signal lines through magnetic dissipation.
• Utilizes a compact 0402 surface-mount footprint for dense circuit board layouts.
• Supports high current handling capabilities suitable for power-sensitive applications.

Chip Ferrite Bead Applications

• High-frequency signal line filtering in consumer electronics
• Noise suppression in portable communication devices
• EMI reduction in compact computer hardware components

Chip Ferrite Bead Procurement Notes

Verify the specific suffix 'U' against official Sunlord documentation to confirm the exact impedance tolerance and current rating, as variations exist within the GZ series. Ensure the ordering part number matches the required packaging format, such as tape and reel or cut tape, directly from the manufacturer's standard specifications. Cross-reference the datasheet for moisture sensitivity level and storage conditions prior to assembly.

Chip Ferrite Bead Selection Notes

Select this component when a low-impedance path is required for high-current signal lines while maintaining effective high-frequency noise attenuation. The 0402 package size is appropriate for space-constrained designs. Compare the 7.5 Ohm impedance at 100 MHz against the target noise spectrum to ensure adequate filtering performance without excessive signal loss.

Chip Ferrite Bead Part Context

This component belongs to the GZ series of multi-layer chip ferrite beads produced by Shenzhen Sunlord Electronics Co., Ltd. The series is designed for general-purpose EMI suppression in various electronic applications. The GZ1005U100CTF specifically targets applications requiring higher current capacity compared to standard variants in the same physical package.

Chip Ferrite Bead Replacement Considerations

Publicly confirmed substitute part numbers are not available in the provided source material. Verify compatibility with alternative suppliers by matching the 0402 package, 7.5 Ohm @ 100 MHz impedance, 1A current rating, and 30 milliohm DCR specifications.