GZ1608U800CTF

Chip Ferrite Bead Overview

The GZ1608U800CTF is a single-line multilayer chip ferrite bead manufactured by Shenzhen Sunlord Electronics Co., Ltd. It features an impedance of 80 Ohms at 100 MHz and supports a maximum current rating of 600 mA. The component has a maximum DC resistance (DCR) of 100 mOhm. It utilizes a 0603 (1608 Metric) surface mount package with dimensions of 1.60 mm x 0.80 mm x 0.80 mm. The device operates within a temperature range of -55°C to +125°C.

Chip Ferrite Bead Feature Summary

• Multilayer construction with internal silver printed layers for signal integrity
• Magnetic shielded structure designed to minimize crosstalk
• Sharp impedance characteristics at target frequencies

Chip Ferrite Bead Applications

• Consumer electronics circuits
• High-speed digital signal line filtering
• Noise suppression in compact surface mount assemblies

Chip Ferrite Bead Procurement Notes

Verify the specific suffix 'CTF' against the manufacturer's official datasheet to confirm packaging and tape specifications. Ensure the part status is active, as availability may vary. Cross-reference the impedance tolerance and DCR limits with the latest revision of the Sunlord specification document before finalizing procurement orders.

Chip Ferrite Bead Selection Notes

Select this component when a low-profile 0603 footprint is required for high-frequency noise attenuation. The 600 mA current rating suits moderate power applications, while the 100 mOhm DCR minimizes voltage drop. Verify that the 80 Ohm impedance profile aligns with the specific noise frequency spectrum of the target circuit design.

Chip Ferrite Bead Part Context

This part belongs to the GZ series of multilayer chip ferrite beads from Sunlord. The series is characterized by its use of magnetic shielding to reduce electromagnetic interference. The GZ1608U800CTF specifically targets applications requiring effective common-mode noise suppression in space-constrained electronic devices.

Chip Ferrite Bead Replacement Considerations

Publicly confirmed substitute part numbers are not available in the provided documentation. Equivalent components must be identified through independent parameter matching of impedance, current rating, and physical dimensions.