H11C4S

$0.54

Description：OPTOISOLATOR 5.3KV SCR 1CH 6-SMD
Series：-
Mfr：onsemi
Package：Tube

SKU:ccea6d7aee10 Category: Triac, SCR Output Optoisolators Brand: onsemi

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

H11C4S is listed in the Triac, SCR Output Optoisolators range at ChipApex. The manufacturer field lists onsemi. Its product description is OPTOISOLATOR 5.3KV SCR 1CH 6-SMD. Review the specifications below when checking this part for your BOM.

Triac, SCR Output Optoisolators specifications for H11C4S

Description：OPTOISOLATOR 5.3KV SCR 1CH 6-SMD
Series：-
Mfr：onsemi
Package：Tube
Output Type：SCR
Zero Crossing Circuit：No
Number of Channels：1
Voltage - Isolation：5300Vrms
Voltage - Off State：400 V
Static dV/dt (Min)：500V/µs
Current - LED Trigger (Ift) (Max)：20mA
Current - On State (It (RMS)) (Max)：300 mA
Current - Hold (Ih)：-
Turn On Time：-
Voltage - Forward (Vf) (Typ)：1.2V
Current - DC Forward (If) (Max)：60 mA
Operating Temperature：-55°C ~ 100°C
Mounting Type：Surface Mount
Package / Case：6-SMD, Gull Wing
Supplier Device Package：6-SMD
Approval Agency：UR

Triac, SCR Output Optoisolators datasheet and documents for H11C4S

H11C4S

Triac, SCR Output Optoisolators Overview

The H11C4S is a single-channel optoisolator from onsemi featuring an SCR output. It provides 5300Vrms isolation voltage and operates within a temperature range of -55°C to +100°C. The device supports a maximum forward current of 60mA with a typical forward voltage of 1.2V. It has a maximum continuous output current of 300mA and a blocking voltage of 400V. The component is available in a surface-mount package.

Triac, SCR Output Optoisolators Feature Summary

Provides high-voltage electrical isolation between input and output circuits
Utilizes silicon phototransistor or SCR technology for signal transmission
Designed for robust performance across wide industrial temperature ranges

Triac, SCR Output Optoisolators Applications

Power supply feedback loops
Motor control systems
Industrial automation interfaces

Triac, SCR Output Optoisolators Procurement Notes

Verify the specific datasheet revision and pinout configuration before integration, as manufacturing sources may vary. Confirm that the surface-mount package variant aligns with your PCB footprint requirements. Ensure compliance with RoHS directives if applicable to your region. Check for any specific handling instructions regarding electrostatic discharge sensitivity during assembly processes.

Triac, SCR Output Optoisolators Selection Notes

Select this component when high isolation voltage is required for SCR triggering applications. Consider the 300mA output capability for driving triacs or SCRs directly. Evaluate the surface-mount form factor against board space constraints. Compare thermal dissipation characteristics against similar through-hole alternatives if heat management is critical.

Triac, SCR Output Optoisolators Part Context

This part belongs to the H11C series of optocouplers, which are designed for general-purpose isolation. The series typically includes variants with different output types such as triac or transistor outputs. These components are widely used in industrial and consumer electronics for safe interface between low-voltage logic and high-voltage power stages.