H11L2300W

Logic Output Optoisolators Overview

The H11L2300W is a single-channel logic output optocoupler from onsemi's H11L series. It features an infrared LED coupled to a high-speed open-collector phototransistor, providing a CMTI of 1MHz and an isolation voltage of 5300Vrms. The device operates within a temperature range of -40°C to 100°C and is housed in a 6-pin DIP package.

Logic Output Optoisolators Feature Summary

• High-speed logic output with open-collector configuration
• Enhanced common-mode transient immunity for noise rejection
• Wide operating temperature range for industrial environments

Logic Output Optoisolators Applications

• Industrial communication interfaces
• Microcontroller input/output isolation
• Signal transmission across isolated grounds

Logic Output Optoisolators Procurement Notes

Verify the specific suffix 'W' against official datasheets to confirm lead-free status and tape-and-reel packaging requirements. Ensure compatibility with standard DIP-6 footprints during PCB layout. Confirm that the 5300Vrms isolation rating meets system safety standards before finalizing procurement.

Logic Output Optoisolators Selection Notes

Select this component when high-speed digital signal isolation is required alongside robust noise immunity. The open-collector output necessitates an external pull-up resistor. Compare CMTI specifications against other logic output isolators to ensure adequate performance in high-noise industrial settings.

Logic Output Optoisolators Part Context

This part belongs to onsemi's H11L family of high-speed logic output optocouplers. Unlike standard transistor outputs, these devices are optimized for faster switching speeds and higher common-mode transient immunity, making them suitable for modern digital communication protocols requiring reliable data transfer across isolation barriers.

Logic Output Optoisolators Replacement Considerations

Check for direct pin-compatible alternatives such as the H11L1 or H11L4 variants if different current transfer ratios are needed. Verify that any substitute maintains the same 5300Vrms isolation rating and 1MHz CMTI specification to ensure circuit integrity.