H11L3SD

$0.41

Description：OPTOISO 5.3KV OPN COLLECTOR 6SMD
Series：-
Mfr：onsemi
Package：Tape & Reel (TR)

SKU:7869d3f5fbc4 Category: Logic Output Optoisolators Brand: onsemi

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

H11L3SD is listed in the Logic Output Optoisolators range at ChipApex. The manufacturer field lists onsemi. Its product description is OPTOISO 5.3KV OPN COLLECTOR 6SMD. Review the specifications below when checking this part for your BOM.

Logic Output Optoisolators specifications for H11L3SD

Description：OPTOISO 5.3KV OPN COLLECTOR 6SMD
Series：-
Mfr：onsemi
Package：Tape & Reel (TR)
Number of Channels：1
Inputs - Side 1/Side 2：1/0
Voltage - Isolation：5300Vrms
Common Mode Transient Immunity (Min)：-
Input Type：DC
Output Type：Open Collector
Current - Output / Channel：50 mA
Data Rate：1MHz
Propagation Delay tpLH / tpHL (Max)：-
Rise / Fall Time (Typ)：-
Voltage - Forward (Vf) (Typ)：-
Current - DC Forward (If) (Max)：5mA
Voltage - Supply：-
Operating Temperature：-
Mounting Type：Surface Mount
Package / Case：6-SMD, Gull Wing
Supplier Device Package：6-SMD
Grade：-
Qualification：-

Logic Output Optoisolators datasheet and documents for H11L3SD

H11L3SD

Logic Output Optoisolators Overview

The onsemi H11L3SD is a single-channel logic output optocoupler featuring an integrated Schmitt trigger. It utilizes surface-mount technology in a six-pin SMD package. The device provides electrical isolation with a rated insulation voltage of 5300 Vrms. Key electrical parameters include a maximum continuous output current of 50 mA, a forward current of 30 mA, and a typical rise/fall time of 100 ns. It operates within a temperature range of -40°C to +85°C.

Logic Output Optoisolators Feature Summary

Integrates a Schmitt trigger for noise immunity
Provides high-voltage electrical isolation
Supports surface-mount installation

Logic Output Optoisolators Applications

Digital signal isolation
Microcontroller interface circuits
Noise-sensitive logic applications

Logic Output Optoisolators Procurement Notes

Verify the specific suffix against official datasheets to confirm pinout and packaging variations. Confirm RoHS compliance status through manufacturer documentation. Ensure the source document explicitly identifies the component as the H11L3SD variant. Cross-reference technical specifications with the latest official release notes.

Logic Output Optoisolators Selection Notes

Select this component when digital isolation with noise rejection is required. The Schmitt trigger input/output configuration ensures clean signal transitions in noisy environments. Verify that the surface-mount package fits the board layout constraints. Check that the isolation voltage meets the system safety requirements.

Logic Output Optoisolators Part Context

This part belongs to the H11L series of logic output optocouplers from onsemi. The series is designed for applications requiring reliable digital signal transmission across isolated barriers. The H11L3SD specifically offers a surface-mount version of the standard DIP packages found in other variants.