HCB 3216KF-601T30

Chip Ferrite Bead Overview

The HCB3216KF-601T30 is a surface-mount ferrite bead manufactured by TAI-TECH Advanced Electronics Co., Ltd. It features an impedance of 600 Ohms at 100 MHz and supports a rated current of 1 Ampere. The component utilizes a 1206 (3216 metric) package size with a single circuit configuration. It is designed for EMI suppression applications within electronic circuits.

Chip Ferrite Bead Feature Summary

• Provides electromagnetic interference suppression through high impedance characteristics at target frequencies
• Supports continuous direct current operation up to one ampere without saturation
• Utilizes a compact surface-mount footprint suitable for automated assembly processes

Chip Ferrite Bead Applications

• General EMI filtering in consumer electronics
• Signal line noise suppression in portable devices
• Power distribution network filtering for low-current circuits

Chip Ferrite Bead Procurement Notes

Verify the specific datasheet version from TAI-TECH to confirm impedance tolerance and DC resistance values. Ensure the ordering suffix matches the required packaging quantity. Cross-reference the AEC qualification status if automotive reliability standards are mandatory for the target application environment.

Chip Ferrite Bead Selection Notes

Select this component when a 600 Ohm impedance at 100 MHz is required for noise attenuation. Confirm that the 1 Ampere current rating aligns with the maximum operating current of the protected circuit. Evaluate the thermal dissipation capabilities of the 1206 package against the expected power loss during continuous operation.

Chip Ferrite Bead Part Context

This part belongs to the HCB series of high-current ferrite beads produced by TAI-TECH. The series focuses on providing effective noise suppression while maintaining stable electrical performance under significant current loads. The 3216 package offers a balance between current handling capacity and board space efficiency.

Chip Ferrite Bead Replacement Considerations

Direct substitutes must match the 600 Ohm impedance at 100 MHz, 1 Ampere current rating, and 1206 package dimensions. Verify equivalent DC resistance and saturation current characteristics to ensure identical circuit behavior.